Page 1 of 1
Winter Shop Work
Posted: Mon Feb 17, 2014 11:14 am
by PVF1799
Hi all - many of you have seen photos of my small shop space. To work in a small space, I've needed to be very creative with storage. I was looking around for some storage ideas when I came across this product, which to my joy is all made in the USA. This system came complete as shown - sans tools of course.
You can see more details here . I'm doing what I can now - Soon I hope the snow blower and winter stuff will be out of the shop - it will warm a bit and I'll be back at Rex'48. It's been way too long.
- Wall Control 1
- IMG_3087 (800x600).jpg (104.46 KiB) Viewed 1163 times
- Wall Control 2
- IMG_3088 (800x600).jpg (133.57 KiB) Viewed 1163 times
- Wall Control 3
- IMG_3090 (800x600).jpg (101.87 KiB) Viewed 1163 times
Re: Winter Shop Work
Posted: Mon Feb 17, 2014 12:49 pm
by grumpy
Looks good
Re: Winter Shop Work
Posted: Tue Feb 18, 2014 12:51 pm
by Billy Fussell
Looks good. Neat, clean, and well organized. All of which, mine isn't.
Billy
Re: Winter Shop Work
Posted: Tue Feb 18, 2014 1:30 pm
by Bob McCarty
Bob
Re: Winter Shop Work
Posted: Tue Feb 18, 2014 3:23 pm
by Stanton
No, no, no. This won't do at all. Way too clean!!
Seriously, looks nice.
Re: Winter Shop Work
Posted: Fri Feb 28, 2014 11:31 am
by Pabst
Looks good, nice and organized.
Re: Winter Shop Work - Now Finished
Posted: Mon Mar 10, 2014 6:54 am
by PVF1799
Re: Winter Shop Work
Posted: Mon Mar 10, 2014 8:26 am
by Stanton
Nice stout bench. I built a work bench using doubled-up 2x4 construction, frame and a solid core door for the top. Put melamine on top of the door and it's been the best work bench I've ever owned.
Yours should give you many years of good service. And when the melamine wears down, replace it and BINGO, new bench all over again.