Farmall Cub

Posted: **Sat Nov 09, 2013 5:53 pm**

Finally got around to taking some pics of the receiver I made for my "new" trailer.
The primary use is for the winch to load those "ran when parked Cubs" we all like to buy.

: IMG_2584.JPG (113.76 KiB) Viewed 775 times

: IMG_2585.JPG (124.17 KiB) Viewed 775 times

: IMG_2591.JPG (127.75 KiB) Viewed 775 times

: IMG_2593.JPG (167.3 KiB) Viewed 775 times

Can slide it in from the other end to store out of the way.

: IMG_2588.JPG (159.93 KiB) Viewed 775 times

Posted: **Sat Nov 09, 2013 5:59 pm**

Looks good, Dave.

Bill

Posted: **Sat Nov 09, 2013 6:13 pm**

Russ

Posted: **Sat Nov 09, 2013 8:18 pm**

Looks good Dave I need to do the same, I already have the winch jus need to find time to mount it.
Berlin

Posted: **Sat Nov 09, 2013 9:11 pm**

Used pretty much the same set up for the manual winch. Place a foot under front of winch mount to floor to keep winch (top rail) from twisting down when towing.

Also welded braces to trailer's top rail back to the trailer tongue to keep trailer's top rail from twisting.

Farmall Cub

Winch on trailer

Winch on trailer

Re: Winch on trailer

Re: Winch on trailer

Re: Winch on trailer

Re: Winch on trailer