This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Powder Coat Curing Oven
- CPIII
- 10+ Years
- Posts: 669
- Joined: Wed Sep 30, 2009 9:43 am
- Zip Code: 77355
- eBay ID: czechiii
- Tractors Owned: 48 Cub SN 54XXX (Captain Crunch)
47 Farmall A (Patches) - Circle of Safety: Y
- Location: Magnolia, Texas
Powder Coat Curing Oven
I am about to start building a curing oven and get setup for powder coating. I was amazed at how inexpensive the guns are now. You can get a decent gun for about $100 and a dual voltage for about $160 (Eastwood) and the powders are a lot cheaper than I thought also. The size of the oven right now is set for 4 ft wide, 4 ft deep and 6 ft tall. This should allow me to cure most things that i have in mind (The Continental Belton KA-5 mower that I am rebuilding). As far as the temperature controls I have everthing already on hand. I have found affordable insulation 3" thick(Fire Rated Batts) for about $120 (130 sqft). I already have two bundles of metal studs which I am going to use to build the enclosure then sheet with 28 ga steel. All in all it should be fairly straight forward. I will be posting pictures soon.
CPIII
CPIII
Charles Patek III
Some days - Chicken.......Some days - Feathers
Words to live by....
Some days - Chicken.......Some days - Feathers
Words to live by....
- CPIII
- 10+ Years
- Posts: 669
- Joined: Wed Sep 30, 2009 9:43 am
- Zip Code: 77355
- eBay ID: czechiii
- Tractors Owned: 48 Cub SN 54XXX (Captain Crunch)
47 Farmall A (Patches) - Circle of Safety: Y
- Location: Magnolia, Texas
Re: Powder Coat Curing Oven
Found this link and I am building mine similar to this one.
http://www.smecca.com/2012/05/how-to-bu ... ting-oven/
http://www.smecca.com/2012/05/how-to-bu ... ting-oven/
Charles Patek III
Some days - Chicken.......Some days - Feathers
Words to live by....
Some days - Chicken.......Some days - Feathers
Words to live by....
- Rudi
- Cub Pro
- Posts: 28706
- Joined: Sun Feb 02, 2003 8:37 pm
- Zip Code: E1A7J3
- Skype Name: R.H. "Rudi" Saueracker, SSM
- Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger - Circle of Safety: Y
- Twitter ID: Rudi Saueracker, SSM
- Location: NB Dieppe, Canada
- Contact:
Re: Powder Coat Curing Oven
Hmmmm... that does look interesting doesn't it Useful project if you are going to powder coat a lot of parts/implements/Cubs
If you have a Habitat for Humanity Restore store in your area, you could find most of this stuff cheap. A goodly part anyways like steel studs, fire rated insulation (from plant demolitions) and maybe even the steel panning.
If you have a Habitat for Humanity Restore store in your area, you could find most of this stuff cheap. A goodly part anyways like steel studs, fire rated insulation (from plant demolitions) and maybe even the steel panning.
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship
- CPIII
- 10+ Years
- Posts: 669
- Joined: Wed Sep 30, 2009 9:43 am
- Zip Code: 77355
- eBay ID: czechiii
- Tractors Owned: 48 Cub SN 54XXX (Captain Crunch)
47 Farmall A (Patches) - Circle of Safety: Y
- Location: Magnolia, Texas
Re: Powder Coat Curing Oven
I found one 16 minutes from me...going by there during lunch!!! Thanks for the tip!!! Great stuff!!!
Charles Patek III
Some days - Chicken.......Some days - Feathers
Words to live by....
Some days - Chicken.......Some days - Feathers
Words to live by....
-
- Team Cub Mentor
- Posts: 5618
- Joined: Thu Aug 03, 2006 6:20 am
- Zip Code: 43358
- Tractors Owned: 48 Cub Diesel (Cubota)
53 Cockshutt 20 restored (Shooter)
52 Cockshutt 20 unrestored
47 Leader "B" (Herckie)
49 Leader "D" (Princess)
49 Leader "D" very rough
48 Leader "D" unrestored
Kubota B6200E
Kubota B6200HST
Kubota B8200HST-D - Circle of Safety: Y
- Location: OH West Mansfield
Re: Powder Coat Curing Oven
I've been wanting to build an oven for some time, currently I can only powder coat small items that I can cure in a standard kitchen range oven. I scrapped out a kitchen range a couple years ago, saving the heating elements and controls. Maybe some day I'll get around to that project. At any rate, I really enjoyed reading about the one in the link. Please keep us informed as the project proceeds.
- CPIII
- 10+ Years
- Posts: 669
- Joined: Wed Sep 30, 2009 9:43 am
- Zip Code: 77355
- eBay ID: czechiii
- Tractors Owned: 48 Cub SN 54XXX (Captain Crunch)
47 Farmall A (Patches) - Circle of Safety: Y
- Location: Magnolia, Texas
Re: Powder Coat Curing Oven
I made a little progress tonight....but it is going to take a while to complete as I have to wait till my project budget gets above 0 (2 kids in College).
Charles Patek III
Some days - Chicken.......Some days - Feathers
Words to live by....
Some days - Chicken.......Some days - Feathers
Words to live by....
- CPIII
- 10+ Years
- Posts: 669
- Joined: Wed Sep 30, 2009 9:43 am
- Zip Code: 77355
- eBay ID: czechiii
- Tractors Owned: 48 Cub SN 54XXX (Captain Crunch)
47 Farmall A (Patches) - Circle of Safety: Y
- Location: Magnolia, Texas
Re: Powder Coat Curing Oven
I may be putting the cart before the horse a little here but I just couldn't pass up the Harbor Freight Powder Coat Gun for $69.....so have gun.....no oven....
http://www.harborfreight.com/10-30-psi- ... 94244.html
The reviews are good for the most part.....but I am just looking for a starting setup and maybe later getting a higher end dual voltage gun. I will do some test runs in a small oven I have to see how it goes.....more pics to come.
http://www.harborfreight.com/10-30-psi- ... 94244.html
The reviews are good for the most part.....but I am just looking for a starting setup and maybe later getting a higher end dual voltage gun. I will do some test runs in a small oven I have to see how it goes.....more pics to come.
Charles Patek III
Some days - Chicken.......Some days - Feathers
Words to live by....
Some days - Chicken.......Some days - Feathers
Words to live by....
- Ken (48 Cub)
- 10+ Years
- Posts: 994
- Joined: Mon Feb 03, 2003 11:10 am
- Zip Code: 40023
- Tractors Owned: 1948 FCub
1957 LoBoy - Circle of Safety: Y
- Location: KY, Fisherville
Re: Powder Coat Curing Oven
One of the comments states that he uses an infrared heater instaed of an oven.....HHHMMM wonder if that would work?
Ken, Annie the '48.
I think we gotter if'n she don't jump, Andy Griffith.
I think we gotter if'n she don't jump, Andy Griffith.
- CPIII
- 10+ Years
- Posts: 669
- Joined: Wed Sep 30, 2009 9:43 am
- Zip Code: 77355
- eBay ID: czechiii
- Tractors Owned: 48 Cub SN 54XXX (Captain Crunch)
47 Farmall A (Patches) - Circle of Safety: Y
- Location: Magnolia, Texas
Re: Powder Coat Curing Oven
They say it works really well...that is how a lot of people powder coat car frames and other large items......never tried it myself though...so just going by what I have read\heard.
Charles Patek III
Some days - Chicken.......Some days - Feathers
Words to live by....
Some days - Chicken.......Some days - Feathers
Words to live by....
-
- Team Cub Mentor
- Posts: 5618
- Joined: Thu Aug 03, 2006 6:20 am
- Zip Code: 43358
- Tractors Owned: 48 Cub Diesel (Cubota)
53 Cockshutt 20 restored (Shooter)
52 Cockshutt 20 unrestored
47 Leader "B" (Herckie)
49 Leader "D" (Princess)
49 Leader "D" very rough
48 Leader "D" unrestored
Kubota B6200E
Kubota B6200HST
Kubota B8200HST-D - Circle of Safety: Y
- Location: OH West Mansfield
Re: Powder Coat Curing Oven
If you look at the Eastwood web site, you'll find infrared heaters designed for curing powder. I've never tried it either, though.
- Mr Joshua
- 10+ Years
- Posts: 370
- Joined: Sun Sep 21, 2008 9:12 pm
- Zip Code: 63023
- Tractors Owned: 1955 Farmall Cub
1951 Super A
1945 A - Circle of Safety: Y
- Location: Dittmer, mo
- Contact:
Re: Powder Coat Curing Oven
I wprk for a really small company and i have recently gotten into all of our production pwder coating.i had to build our full setup on a small buget yet useful for production. I went to teds fab for our oven. They also sell controls for home built ovens. I just built a new booth out of metal studs and sheet metal.
When i first started coating i used a harbor freight gun.it worked pretty well but is noy easy to change colors. Columbia coatings is a good place for powder.they have a good selection anlt a decent price. Also they have ih and cub cadet colors.
If you have any questions about anything just ask.
When i first started coating i used a harbor freight gun.it worked pretty well but is noy easy to change colors. Columbia coatings is a good place for powder.they have a good selection anlt a decent price. Also they have ih and cub cadet colors.
If you have any questions about anything just ask.
Mr. Joshua
74 VW super beetle (o\ /o)
1955 cub
1951 Super A
1945 A
and any of TC's toys
74 VW super beetle (o\ /o)
1955 cub
1951 Super A
1945 A
and any of TC's toys
- CPIII
- 10+ Years
- Posts: 669
- Joined: Wed Sep 30, 2009 9:43 am
- Zip Code: 77355
- eBay ID: czechiii
- Tractors Owned: 48 Cub SN 54XXX (Captain Crunch)
47 Farmall A (Patches) - Circle of Safety: Y
- Location: Magnolia, Texas
Re: Powder Coat Curing Oven
I see posting for gun mods for the HF powder coat gun. Was the HF PC gun you used modified in any way?
http://forum.caswellplating.com/powder- ... e-ago.html
http://forum.caswellplating.com/powder- ... e-ago.html
Charles Patek III
Some days - Chicken.......Some days - Feathers
Words to live by....
Some days - Chicken.......Some days - Feathers
Words to live by....
- Mr Joshua
- 10+ Years
- Posts: 370
- Joined: Sun Sep 21, 2008 9:12 pm
- Zip Code: 63023
- Tractors Owned: 1955 Farmall Cub
1951 Super A
1945 A - Circle of Safety: Y
- Location: Dittmer, mo
- Contact:
Re: Powder Coat Curing Oven
It was completely stock. did not have any problems with it. Just could not adjust the power level and changing powder colors is not too easy. I have a new gun now from columbia coatings.
Mr. Joshua
74 VW super beetle (o\ /o)
1955 cub
1951 Super A
1945 A
and any of TC's toys
74 VW super beetle (o\ /o)
1955 cub
1951 Super A
1945 A
and any of TC's toys
- CPIII
- 10+ Years
- Posts: 669
- Joined: Wed Sep 30, 2009 9:43 am
- Zip Code: 77355
- eBay ID: czechiii
- Tractors Owned: 48 Cub SN 54XXX (Captain Crunch)
47 Farmall A (Patches) - Circle of Safety: Y
- Location: Magnolia, Texas
Re: Powder Coat Curing Oven
Holy Crap!! I though powder coating would be cool ....but this is way cooler than I expected.....The HF Powder Coat gun works Awesome!!
Proof positive below:
Cooking:
Done:
Proof positive below:
Cooking:
Done:
Charles Patek III
Some days - Chicken.......Some days - Feathers
Words to live by....
Some days - Chicken.......Some days - Feathers
Words to live by....
- Rudi
- Cub Pro
- Posts: 28706
- Joined: Sun Feb 02, 2003 8:37 pm
- Zip Code: E1A7J3
- Skype Name: R.H. "Rudi" Saueracker, SSM
- Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger - Circle of Safety: Y
- Twitter ID: Rudi Saueracker, SSM
- Location: NB Dieppe, Canada
- Contact:
Re: Powder Coat Curing Oven
Charles:
Wow! That looks cool. I like how that hub turned out
Wow! That looks cool. I like how that hub turned out
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship
Who is online
Users browsing this forum: No registered users and 5 guests