193 plow depth adjuster

Sun Mar 18, 2012 5:40 pm

To cheap to buy one so i figure i would try and build my own. Works great once u get it set where u want it.
IMG_0926[1].JPG
IMG_0927[1].JPG
IMG_0928[1].JPG
You do not have the required permissions to view the files attached to this post.

Re: 193 plow depth adjuster

Sun Mar 18, 2012 6:58 pm

I've done something like that in a bind (ok...a couple of seasons), but the advantage of the depth lever is that you can adjust the depth of the plow while you move through the field. With an unadjustable link like what you have here, you'll have to plow the whole field to the depth of your most-difficult-to-plow area.

With that said, it is a solution to get the plow in the ground. Looks sharp!

Re: 193 plow depth adjuster

Sun Mar 18, 2012 7:11 pm

I totally agree, like u said its just to get plows in the ground (back yard garden)

Re: 193 plow depth adjuster

Sun Mar 18, 2012 8:37 pm

If you check the travel of your rockshaft You will find that it moves much further than is needed to allow the plow the depth it needs. I have never tried it, but I believe that travel may be enough that you could connect the top link to it and use the hydraulics to fine tune the depth.