This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Changes to my corn grinder New PICS.added pics
-
- Cub Pro
- Posts: 7511
- Joined: Thu Aug 31, 2006 7:00 pm
- Zip Code: 02769
- Tractors Owned: 6"F" cubs
5 lo-boys
1 154
1 184
1 IH444
1 Oliver OC3 crawler
1 AC D10
1 IH 100 manure spreader
1 IH model B corn grinder
3 power units
cub demonstrator - Circle of Safety: Y
- Location: Ma. Rehoboth
Changes to my corn grinder New PICS.added pics
I've been working on my corn grinder, this winter. After several seasons of struggling with belt alignment issues, on loose filled soil, I decided to make a one piece assembly, powered with a power unit. Still belt driven, but all mounted on a frame. I had been using a cub final drive, for pto speed reduction, and still needed it, for the new set up. I'm trying to keep the width reasonable, so I needed to shorten the upper axle, and make a new pulley, which overlaps part of the final drive. The pulley for the original set up, needed to stick out beyond the rear tires, so the belt would clear the tires. I brought the parts to the county agricultural high school, for consultation, and hopefully, some lathe work. They were able to turn down the short axle, to accept a flexable coupler, add a keyway, and cut off the excess. They also made me a pulley hub, to mount on the final drive hub, and dress up the edges, of the 6 inch well casing pipe, I provided, The previous pulley was the same type of pipe,welded to a car wheel, that matched the final. I brought the parts home, to trial fit, and to decide where the hub has to go. I'll return the pulley parts to the school, for welding. I have no way to true up the alignment, on this pulley. I was able to weld the first one, myself. Pictures of the school modified parts will follow, if I can get someone to post them, from my e-mailed photos. (need to get my daughter to put them on the computer, for me. Hope to have its debut, at ConnectiCubfest. Ed
Last edited by ScottyD'sdad on Tue May 01, 2012 11:35 am, edited 2 times in total.
-
- Team Cub
- Posts: 9535
- Joined: Wed Jul 26, 2006 10:50 am
- Zip Code: 44057
- Tractors Owned: 57 F-Cub - Dad & Mom's Cub
77 F-Cub - Red Long Stripe - Circle of Safety: Y
- Location: OH, Madison
Re: Changes to my corn grinder
Ed,
Waiting for the pics with baited breath. Sounds like a real neat setup. To bad that the CT CubFest is not closer.
Bill
Waiting for the pics with baited breath. Sounds like a real neat setup. To bad that the CT CubFest is not closer.
Bill
-
- Team Cub
- Posts: 24282
- Joined: Tue Aug 07, 2007 3:39 pm
- Zip Code: 45030
- Tractors Owned: At This Time
40 Farmall Cubs (Round Hood)
2 Farmall Cub (Square Hood)
2 IH Cubs (Square Hood)
5 Lo-Boys (Round Hood)
2 Lo-Boys (Square Hood)
2 Farmall 404's
1 Farmall H
1 Ferguson 20
1 Cub Cadet 125
1 Kubota B-7100 - Circle of Safety: Y
- Location: OH, New Haven (Hamilton County)
Re: Changes to my corn grinder
Ed, I can post them for you if need be.
There are two ways to get enough Cubs. One is to continue to accumulate more and more. The other is to desire less.
-
- Cub Pro
- Posts: 1866
- Joined: Sun Feb 22, 2009 3:30 pm
- Zip Code: 02748
- Tractors Owned: :
1949 Farmall Cub / FH
1951 Farmall Cub / IH mower
1964 International Cub Lo-Boy / Woods 59 mower
1967 International Cub / FH
1946 Farmall H
1949 Farmall H
a doodle bug
More than a dozen Cub Cadets running plus a few in the bone-yard
. - Location: Dartmouth, Massachusetts
Re: Changes to my corn grinder
We're gonna make a nice youTube video of Ed and the corn grinder at CT CubFest. Maybe then he'll forgive me for all the harassment!
REMEMBER: Keep it correct or you may face the
-
- Cub Pro
- Posts: 1866
- Joined: Sun Feb 22, 2009 3:30 pm
- Zip Code: 02748
- Tractors Owned: :
1949 Farmall Cub / FH
1951 Farmall Cub / IH mower
1964 International Cub Lo-Boy / Woods 59 mower
1967 International Cub / FH
1946 Farmall H
1949 Farmall H
a doodle bug
More than a dozen Cub Cadets running plus a few in the bone-yard
. - Location: Dartmouth, Massachusetts
Re: Changes to my corn grinder
Barnyard wrote:Ed, I can post them for you if need be.
Yea Bill maybe you should do it, he doesn't trust me any more.
REMEMBER: Keep it correct or you may face the
-
- Cub Pro
- Posts: 7511
- Joined: Thu Aug 31, 2006 7:00 pm
- Zip Code: 02769
- Tractors Owned: 6"F" cubs
5 lo-boys
1 154
1 184
1 IH444
1 Oliver OC3 crawler
1 AC D10
1 IH 100 manure spreader
1 IH model B corn grinder
3 power units
cub demonstrator - Circle of Safety: Y
- Location: Ma. Rehoboth
Re: Changes to my corn grinder
Barnyard wrote:Ed, I can post them for you if need be.
I'll send a couple of pics, of the shaft and pulley machine work, by the school kids. More pics will follow, as I progress. (Now that my donut dispenser/boat anchor/dog tie out/wheel chock, project is finished, it will go faster) Ed
-
- Cub Pro
- Posts: 7511
- Joined: Thu Aug 31, 2006 7:00 pm
- Zip Code: 02769
- Tractors Owned: 6"F" cubs
5 lo-boys
1 154
1 184
1 IH444
1 Oliver OC3 crawler
1 AC D10
1 IH 100 manure spreader
1 IH model B corn grinder
3 power units
cub demonstrator - Circle of Safety: Y
- Location: Ma. Rehoboth
Re: Changes to my corn grinder
bobperry wrote:Barnyard wrote:Ed, I can post them for you if need be.
Yea Bill maybe you should do it, he doesn't trust me any more.
Bob, I don't trust you, any more, but, I don't trust you, any less, either. Bill will post when he gets back from a meeting. Ed
-
- Team Cub
- Posts: 24282
- Joined: Tue Aug 07, 2007 3:39 pm
- Zip Code: 45030
- Tractors Owned: At This Time
40 Farmall Cubs (Round Hood)
2 Farmall Cub (Square Hood)
2 IH Cubs (Square Hood)
5 Lo-Boys (Round Hood)
2 Lo-Boys (Square Hood)
2 Farmall 404's
1 Farmall H
1 Ferguson 20
1 Cub Cadet 125
1 Kubota B-7100 - Circle of Safety: Y
- Location: OH, New Haven (Hamilton County)
Re: Changes to my corn grinder
Gee Bob, I think you ruffled Ed's feathers a bit.
Ed, I'm back from my meeting. All they wanted to do was talk about Jeeps. Nobody wanted to talk about tractors.
Here are Ed's pix. Can you spot the hidden chocolate eclair?
Ed, I'm back from my meeting. All they wanted to do was talk about Jeeps. Nobody wanted to talk about tractors.
Here are Ed's pix. Can you spot the hidden chocolate eclair?
There are two ways to get enough Cubs. One is to continue to accumulate more and more. The other is to desire less.
-
- Cub Pro
- Posts: 7511
- Joined: Thu Aug 31, 2006 7:00 pm
- Zip Code: 02769
- Tractors Owned: 6"F" cubs
5 lo-boys
1 154
1 184
1 IH444
1 Oliver OC3 crawler
1 AC D10
1 IH 100 manure spreader
1 IH model B corn grinder
3 power units
cub demonstrator - Circle of Safety: Y
- Location: Ma. Rehoboth
Re: Changes to my corn grinder
In the axle photos,the one on the left, is the one I used originally. The spline end was turned down, to 3/4 inch, and a coupler added, to connect to the pto. Right photo, the new axle, shortened, and turned down, to 1 3/8, for a new coupler half.
The pulley photos show the hub, mate to fit the cub rear wheel mount on the axle, and the well casing pipe, to be the pulley. I attached and measured, yesterday, and will take those parts back, to be welded together. I have no way to hold the parts, accurately enough, to get it to run true. I welded the old pulley, which was welded to a car wheel center. A strap, across the lug bolts, holding a length of threaded rod, and a wooden end plate, held that. I tightened it down, ran the pto, and tapped and tightened, until it ran true, and welded it. More pictures, next week. Ed
The pulley photos show the hub, mate to fit the cub rear wheel mount on the axle, and the well casing pipe, to be the pulley. I attached and measured, yesterday, and will take those parts back, to be welded together. I have no way to hold the parts, accurately enough, to get it to run true. I welded the old pulley, which was welded to a car wheel center. A strap, across the lug bolts, holding a length of threaded rod, and a wooden end plate, held that. I tightened it down, ran the pto, and tapped and tightened, until it ran true, and welded it. More pictures, next week. Ed
-
- Cub Pro
- Posts: 1866
- Joined: Sun Feb 22, 2009 3:30 pm
- Zip Code: 02748
- Tractors Owned: :
1949 Farmall Cub / FH
1951 Farmall Cub / IH mower
1964 International Cub Lo-Boy / Woods 59 mower
1967 International Cub / FH
1946 Farmall H
1949 Farmall H
a doodle bug
More than a dozen Cub Cadets running plus a few in the bone-yard
. - Location: Dartmouth, Massachusetts
Re: Changes to my corn grinder
That's quite a project, Ed. We're lucky to have a good ag school locally. Make sure it's done for May 2 so we can put on youTube !
REMEMBER: Keep it correct or you may face the
-
- Cub Pro
- Posts: 7511
- Joined: Thu Aug 31, 2006 7:00 pm
- Zip Code: 02769
- Tractors Owned: 6"F" cubs
5 lo-boys
1 154
1 184
1 IH444
1 Oliver OC3 crawler
1 AC D10
1 IH 100 manure spreader
1 IH model B corn grinder
3 power units
cub demonstrator - Circle of Safety: Y
- Location: Ma. Rehoboth
Re: Changes to my corn grinder
Picked up the welded together pulley, today. Looks really good. I'll be working on the clutch assembly, and then will get some pictures. Ed
-
- 10+ Years
- Posts: 7703
- Joined: Thu Aug 19, 2004 2:31 pm
- Zip Code: 10314
- Location: NY Staten Island & Franklin
Re: Changes to my corn grinder
You trying it on corn to bring to cecils????? i MADE SOME TERRIFFIC CORN BREAD FROM THE LAST batch you gave me.
Bill
"Life's tough.It's even tougher if you're stupid."
- John Wayne
" We hang petty thieves and appoint the great ones to public office."
- Aesop
"Life's tough.It's even tougher if you're stupid."
- John Wayne
" We hang petty thieves and appoint the great ones to public office."
- Aesop
-
- Cub Pro
- Posts: 7511
- Joined: Thu Aug 31, 2006 7:00 pm
- Zip Code: 02769
- Tractors Owned: 6"F" cubs
5 lo-boys
1 154
1 184
1 IH444
1 Oliver OC3 crawler
1 AC D10
1 IH 100 manure spreader
1 IH model B corn grinder
3 power units
cub demonstrator - Circle of Safety: Y
- Location: Ma. Rehoboth
Re: Changes to my corn grinder
beaconlight wrote:You trying it on corn to bring to cecils????? i MADE SOME TERRIFFIC CORN BREAD FROM THE LAST batch you gave me.
Won't be ready to bring cornmeal to Cecil's minifest. Aiming for ConnectiCubfest. Ed
-
- Cub Pro
- Posts: 7511
- Joined: Thu Aug 31, 2006 7:00 pm
- Zip Code: 02769
- Tractors Owned: 6"F" cubs
5 lo-boys
1 154
1 184
1 IH444
1 Oliver OC3 crawler
1 AC D10
1 IH 100 manure spreader
1 IH model B corn grinder
3 power units
cub demonstrator - Circle of Safety: Y
- Location: Ma. Rehoboth
Re: Changes to my corn grinder
Finished getting the baler clutch hooked up, and working. Took the whole thing apart, to finish welding on the frame, wire wheeling and painting. I had tack welded a lot of the pieces, to allow for revisions. Now that everything is correct, its time to properly weld it all. Hopefully, I'll have it back together, and pictures, this weekend. Ed
-
- 10+ Years
- Posts: 3562
- Joined: Thu Apr 22, 2010 2:31 pm
- Zip Code: 17953
- Tractors Owned: ......Almost enough.
N3NIK - Circle of Safety: Y
- Location: PA, Middleport (Schuylkill County)
Re: Changes to my corn grinder
Looking forward to seeing it finished, Ed !
Dave
"More gold has been mined from the thoughts of men than has been taken from the earth." -- Napoleon Hill
"More gold has been mined from the thoughts of men than has been taken from the earth." -- Napoleon Hill
-
- Similar Topics
- Replies
- Views
- Last post
-
-
pics
by Boss Hog » Mon Sep 12, 2022 7:24 pm » in CubFest and Tractor Show Announcements & Discussions - 2
- 232
-
by Don McCombs
Mon Sep 12, 2022 9:31 pm
-
-
- 3
- 282
-
by Bill Hudson
Tue Apr 04, 2023 5:10 pm
-
-
A few pics from Barnyard Bash ‘22 Attachment(s)
by clintmo » Sat Jun 04, 2022 1:29 pm » in CubFest and Tractor Show Announcements & Discussions - 10
- 464
-
by Greenthumbfarms
Sun Jun 19, 2022 11:56 am
-
-
-
Louisiana Cubfest Pics Attachment(s)
by Cub-Bud » Tue Mar 28, 2023 8:58 am » in CubFest and Tractor Show Announcements & Discussions - 7
- 1411
-
by Cub-Bud
Wed Mar 29, 2023 8:55 am
-
-
- 9
- 384
-
by Mike in Louisiana
Sat Oct 21, 2023 1:28 am
Who is online
Users browsing this forum: No registered users and 0 guests