Got a project that you are working on that is not a tractor? Maybe a barn to hold your tractors or just fun stuff like woodworking, glass, tools, sheds, gardens, custom implements, etc., this is the place to talk about it.
Moderator: Team Cub
4 posts • Page 1 of 1
Finished my battery box project for Nellie ('47 Circle Cub) this weekend. It was a fun and rewarding project.
Here's some pictures:
Started with the old battery box from my '48 Cub. It's a little ragged, but complete. This is what I used for the model; the brake is also shown:
First thing was to make a decision about the base. I could not form/shape/mold the base of the box like the original, but needed to come up with a way to keep the overall size and look of the original. Decided to use a flat piece of sheet metal for the inside base with access holes leading to two runners. This would allow the bolt heads to be recessed and keep the looks of the box on the outside. Here's the layout of the runners:
Next was the bottom, inside plate:
Had to slope the ends to mimick the original:
Now for the base:
You can see it taking shape:
Here, with all the sides bent:
Next, drill out the access holes:
Runners are ready to be welded in place:
Cut and bent the lid and rear light holders for the back of the box, the front, and the sides. New ones are just laying on the old box on the left:
The hardest was the top. It had to fit tight, but not too tight, encompassing the sides and front. Here's how that went:
Layed out my lines then made a little extra cut in the corner:
Bent the two sides, then had to use the bench vise to hold and bend the back and front (wouldn't fit in the metal brake):
With a little adjustment and patience, the pieces are all done and welded:
Took the seat post and differential shaft housing, bolted in the new box and new toolbox to see how they fit. Believe it's gonna work (oh yeah, had some sheet metal left over so made a couple PTO shields):
My 1945 Farmall H makeover
This is pretty much how Richard and I made the dozen or so boxes back in 2003/2004 in my battery box project for Ellie-Mae. The only major difference was that we actually cut out the strips of metal where the runners would be welded.
This will be useful for those who have the desire to make their own boxes. 16 gauge has lasted 8 years so far with no hint of rust
You're just having too much fun with that new brake, aren't you??
You're my hero!!
Keep 'em coming!!
1929 Farmall Regular
1935 John Deere B
1937 John Deere A
1941 John Deere H
1952 John Deere B
1953 Farmall Cub
4 posts • Page 1 of 1
Who is online
Users browsing this forum: No registered users and 2 guests