This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
New Home for my Cubs
-
- Cub Pro
- Posts: 28706
- Joined: Sun Feb 02, 2003 8:37 pm
- Zip Code: E1A7J3
- Skype Name: R.H. "Rudi" Saueracker, SSM
- Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger - Circle of Safety: Y
- Twitter ID: Rudi Saueracker, SSM
- Location: NB Dieppe, Canada
Guys:
Thanks for the kind words, they are appreciated a lot. It means a lot when it comes from your friends. Basically the I-Beam idea arose from the bypass surgery and since. I cannot do what I used to so working smart not hard demanded that I do this. May as well do it now instead of wishing I had in the future.
Bill: I like her thinking... unfortunately, we will still need lighting at night.. but it should be relatively warm even in winter with the southern exposure. And yup, I think the Clampetts will be happy in there.
Jim: By the time I get the racking done.. it will be just about full.
Gilles: I haven't forgotten your part in this... the electrical is yours. Gonna need some 220 in there for the welder and a bunch of 110 plugs as well. All flourescent light fixtures too... so there will be a mini-fest when you get here. Also, you will get a chance to take a run on Ellie.. maybe Granny too And yup that is what I have been up to.
Ron: I know why I didn't do it sooner -- it is called 5 kids and 3 in university.. And after the plumbing job.. I realized that I can't do what I used to, so I gots to work smarter and not harder. The I-Beam trolley will be really useful. So will the I-Beam Lawn Tractor Lift system that I am designing. Gonna need som proofing from all the pros here... that is for sure...
Eugene: Yeah it is what Em and everybody here call Rudi-ized... I always figure what I need then double it... that way I never have to worry. I also use ratios when deciding member sizes. And yeah, it is a little overbuilt.. but I figure when we have something coming at us like Hurrican Noel this weekend.. and it is gonna hit us square in the middle if the track remains constant, I am going to need all the over engineering I can get. I hope the rest of the shop stays together too.. Also, the snow load is figured at approximately 100lbs/sq ft.. that is live plus 100 lbs/sq ft dead load. With the max span 7.1 feet.. 2x6's at 24 and cross strapped at 12 with 1/2" deck should suffice nicely. But, no not really is the design based on the snow load.. just experience. I have seen far too many buildings collapse because of insufficient design work.. and I made a deal with myself back in college when I was studying architecture to never ever skimp. My Dad also taught me a lot about that...
Oh another reason.. you should see the winds here. We had strong ones today.. mostly steady at about 50-60 kph with gusts almost twice that.. and dirt/dust devils were really common today. Got so bad I couldn't do anywork on the roof. Had to stay on the ground.
Ron: When you and Janelle come up next, we will see just how big a piece of equipment we might be able to fit in that tank.. Should be all ready by then. The M-H#1 Digger (parts one) is barely visible in the pics.. but much of that is going to have to go in whole as it is some froze up.
Cecil: This is what I was hoping to have done before you got here for our mini-fest visit this year. Next year, we will be able to work in well country style I guess.. Gonna need some room for the stuff
Scott: No problem.. us navy guys need to keep it tight...
Larry: I like the idea of the electric winches./hoists.. but a 5 ton is probably out of my pocketbook. I think I will be looking at a 600/1200 double line hoist and see where I can go beyond that.
Paul: I have been hoping to get the barn built to house the tank. Probably beginning of the week, Ray will lift the tank for me to it's new home on a sub floor at the west end of the shop just under the beam. I think a 400 Imp Gallon tank should be about as big as I will need to go, I hope.
Pete, Vince, Al: Thanks.. I appreciate. Already am kinda pleased. Vince, give our best to Annie..
Thanks for the kind words, they are appreciated a lot. It means a lot when it comes from your friends. Basically the I-Beam idea arose from the bypass surgery and since. I cannot do what I used to so working smart not hard demanded that I do this. May as well do it now instead of wishing I had in the future.
Bill: I like her thinking... unfortunately, we will still need lighting at night.. but it should be relatively warm even in winter with the southern exposure. And yup, I think the Clampetts will be happy in there.
Jim: By the time I get the racking done.. it will be just about full.
Gilles: I haven't forgotten your part in this... the electrical is yours. Gonna need some 220 in there for the welder and a bunch of 110 plugs as well. All flourescent light fixtures too... so there will be a mini-fest when you get here. Also, you will get a chance to take a run on Ellie.. maybe Granny too And yup that is what I have been up to.
Ron: I know why I didn't do it sooner -- it is called 5 kids and 3 in university.. And after the plumbing job.. I realized that I can't do what I used to, so I gots to work smarter and not harder. The I-Beam trolley will be really useful. So will the I-Beam Lawn Tractor Lift system that I am designing. Gonna need som proofing from all the pros here... that is for sure...
Eugene: Yeah it is what Em and everybody here call Rudi-ized... I always figure what I need then double it... that way I never have to worry. I also use ratios when deciding member sizes. And yeah, it is a little overbuilt.. but I figure when we have something coming at us like Hurrican Noel this weekend.. and it is gonna hit us square in the middle if the track remains constant, I am going to need all the over engineering I can get. I hope the rest of the shop stays together too.. Also, the snow load is figured at approximately 100lbs/sq ft.. that is live plus 100 lbs/sq ft dead load. With the max span 7.1 feet.. 2x6's at 24 and cross strapped at 12 with 1/2" deck should suffice nicely. But, no not really is the design based on the snow load.. just experience. I have seen far too many buildings collapse because of insufficient design work.. and I made a deal with myself back in college when I was studying architecture to never ever skimp. My Dad also taught me a lot about that...
Oh another reason.. you should see the winds here. We had strong ones today.. mostly steady at about 50-60 kph with gusts almost twice that.. and dirt/dust devils were really common today. Got so bad I couldn't do anywork on the roof. Had to stay on the ground.
Ron: When you and Janelle come up next, we will see just how big a piece of equipment we might be able to fit in that tank.. Should be all ready by then. The M-H#1 Digger (parts one) is barely visible in the pics.. but much of that is going to have to go in whole as it is some froze up.
Cecil: This is what I was hoping to have done before you got here for our mini-fest visit this year. Next year, we will be able to work in well country style I guess.. Gonna need some room for the stuff
Scott: No problem.. us navy guys need to keep it tight...
Larry: I like the idea of the electric winches./hoists.. but a 5 ton is probably out of my pocketbook. I think I will be looking at a 600/1200 double line hoist and see where I can go beyond that.
Paul: I have been hoping to get the barn built to house the tank. Probably beginning of the week, Ray will lift the tank for me to it's new home on a sub floor at the west end of the shop just under the beam. I think a 400 Imp Gallon tank should be about as big as I will need to go, I hope.
Pete, Vince, Al: Thanks.. I appreciate. Already am kinda pleased. Vince, give our best to Annie..
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship
-
- 10+ Years
- Posts: 2729
- Joined: Sun Oct 03, 2004 7:11 am
- Zip Code: 03848
- eBay ID: panelbeata
- Tractors Owned: 1947 circle cub
1950 cub demonstrator
1957 cub
1967 cub - Circle of Safety: Y
- Location: NH, Kingston
rudi , thats going to be a nice shop when your done, we also broke ground for our garage/barn. we had the foundation poured this week and hopefully start building next spring.i really enjoy seeing all the different shops and barn that everybody has as it gives us alot of different ideas, thanks for the pics. the i beam is a great idea too.
-
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
-
- 10+ Years
- Posts: 694
- Joined: Tue Feb 04, 2003 6:17 am
- Location: NH, Ossipee
-
- 10+ Years
- Posts: 309
- Joined: Sat Aug 07, 2004 11:08 am
- Location: Enfield Nova Scotia
-
- 10+ Years
- Posts: 609
- Joined: Mon May 08, 2006 3:15 pm
- Zip Code: 00000
-
- Cub Pro
- Posts: 28706
- Joined: Sun Feb 02, 2003 8:37 pm
- Zip Code: E1A7J3
- Skype Name: R.H. "Rudi" Saueracker, SSM
- Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger - Circle of Safety: Y
- Twitter ID: Rudi Saueracker, SSM
- Location: NB Dieppe, Canada
Rick:
As you have noticed , there may be a bit of side to side sway. It is still basically a sky hook. Until we get it properly welded and then anchored it will do that. If it survives Hurricane/Tropical Storm Noel.. then when we get the roof done hopefully next week, then the issues should go away.
There will be next to no top loading, so compression is not an issue.. torsion is not an issue and the deflection concerns will be addressed by the bracing.
More pics to follow.
Our biggest concern is Hurrican Noel. They are forecasting winds of over 140 kph now and the storm is tracking right over us. We expect to lose power tonight as well and there maybe an awful lot of rain... it is currently raining and the winds are picking up.
A couple friends were over giving me a hand this afternoon. We got the first row of sheathing up on the new pole barn and across part of the old shop. This is going to make it even much more stable. We did leave about half of the completed framing unsheathed to minimize any collateral damage from the storm. Made it just in time. As we finished putting away the tools.. the rain started.
As you have noticed , there may be a bit of side to side sway. It is still basically a sky hook. Until we get it properly welded and then anchored it will do that. If it survives Hurricane/Tropical Storm Noel.. then when we get the roof done hopefully next week, then the issues should go away.
There will be next to no top loading, so compression is not an issue.. torsion is not an issue and the deflection concerns will be addressed by the bracing.
More pics to follow.
Our biggest concern is Hurrican Noel. They are forecasting winds of over 140 kph now and the storm is tracking right over us. We expect to lose power tonight as well and there maybe an awful lot of rain... it is currently raining and the winds are picking up.
A couple friends were over giving me a hand this afternoon. We got the first row of sheathing up on the new pole barn and across part of the old shop. This is going to make it even much more stable. We did leave about half of the completed framing unsheathed to minimize any collateral damage from the storm. Made it just in time. As we finished putting away the tools.. the rain started.
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship
-
- 10+ Years
- Posts: 914
- Joined: Fri Jan 12, 2007 3:07 pm
- Zip Code: 77802
- Tractors Owned: The '51
Blue Boy
Scout
a host of parts tractors - Location: Aggieland, Texas
Howdy Rudi! When you and Gilles get to the electrical consider this in addition to or in lieu of some of those 10,000 outlets. Put a branch circuit in conduit up on the ceiling offset from the I-beam 5' or 6'. Break the conduit every 5' with a duplex box. Around here conduit typically comes in 10' joints.
Then be on the lookout for Harbor Freight, Princess, or whatever for a sale on 12AWG 25' extension cords. Get enough cords for each box on the ceiling. Determine the distance from the ceiling box down to head height - 6". Cut the female ends and wire them into the ceiling boxes. You will now have convenient drops for a grinder, light or whatever. Reach up, plug in, and go. The drops eliminate the hassle having an extension cord snake pit on your floor. On those rare occasions that you need to plug 2 items, use a 3-way tap. The 12AWG will carry the current for everything short of a welder.
If you want to be righteous about the drops, use a cable clamp up by the ceiling box to take the strain of the cord. Keep the male ends in a box, and you will have handy cords to rewire shop electrical items. The extension cords, when on sale, are cheaper than a piece of SJT and receptacle.
Enjoy your new digs!
Rick (envisioning a wireless shop) Dulas
Then be on the lookout for Harbor Freight, Princess, or whatever for a sale on 12AWG 25' extension cords. Get enough cords for each box on the ceiling. Determine the distance from the ceiling box down to head height - 6". Cut the female ends and wire them into the ceiling boxes. You will now have convenient drops for a grinder, light or whatever. Reach up, plug in, and go. The drops eliminate the hassle having an extension cord snake pit on your floor. On those rare occasions that you need to plug 2 items, use a 3-way tap. The 12AWG will carry the current for everything short of a welder.
If you want to be righteous about the drops, use a cable clamp up by the ceiling box to take the strain of the cord. Keep the male ends in a box, and you will have handy cords to rewire shop electrical items. The extension cords, when on sale, are cheaper than a piece of SJT and receptacle.
Enjoy your new digs!
Rick (envisioning a wireless shop) Dulas
-
- Team Cub
- Posts: 24272
- Joined: Tue Aug 07, 2007 3:39 pm
- Zip Code: 45030
- Tractors Owned: At This Time
40 Farmall Cubs (Round Hood)
2 Farmall Cub (Square Hood)
2 IH Cubs (Square Hood)
5 Lo-Boys (Round Hood)
2 Lo-Boys (Square Hood)
2 Farmall 404's
1 Farmall H
1 Ferguson 20
1 Cub Cadet 125
1 Kubota B-7100 - Circle of Safety: Y
- Location: OH, New Haven (Hamilton County)
drspiff wrote:Cut the female ends and wire them into the ceiling boxes. You will now have convenient drops for a grinder, light or whatever. Reach up, plug in, and go.
Rick, don't you mean "cut the male ends" (no jokes here okay guys). The female ends are what you want hanging down (again no jokes here either)
There are two ways to get enough Cubs. One is to continue to accumulate more and more. The other is to desire less.
-
- 10+ Years
- Posts: 694
- Joined: Tue Feb 04, 2003 6:17 am
- Location: NH, Ossipee
-
- Team Cub
- Posts: 17279
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
-
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
-
- 10+ Years
- Posts: 1091
- Joined: Tue Sep 12, 2006 6:06 pm
- Zip Code: J7Z1B7
- Location: Quebec,Canada
-
- Cub Pro
- Posts: 28706
- Joined: Sun Feb 02, 2003 8:37 pm
- Zip Code: E1A7J3
- Skype Name: R.H. "Rudi" Saueracker, SSM
- Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger - Circle of Safety: Y
- Twitter ID: Rudi Saueracker, SSM
- Location: NB Dieppe, Canada
Rick:
Thanks for the idea... I hadn't gotten that far yet. But that is a good I shall look at Princess.. they have another sale on. And, I gots Gilles
Boy this is getting expensive. But I have saved a lot of money so far. I think I have spent less than $500.00 total on stock, but that doesn't include the tools and accessories that I had to buy.
Plywood is free - just had to recycle some old sign faces my brother-in-law gave me. So far I have 88 4'-x10' exterior grade douglas fir plywood sheets for sheathing. Gonna be a nice barn. Got the first row of sheets up today before the storm started.
And I need sliding barn door hardware and the track. I remember seeing it at Princess last year ... seemed to be a stock item. Will have to check the Co-Op too I guess. I can't even remember what the stuff is actually called. All I know is that it uses a rectangular steel tube or inverted C-Channel.. has dolly wheels up top with levellers and guide wheels on the bottom that runs against the building... I want to build on 8 foot x 9 foot sliding door...
I got more pics downloaded and uploaded from Em's camera.. but it is too late to post tonight. I am bushed.. So far it has been a great couple of weeks.
Thanks for the idea... I hadn't gotten that far yet. But that is a good I shall look at Princess.. they have another sale on. And, I gots Gilles
Boy this is getting expensive. But I have saved a lot of money so far. I think I have spent less than $500.00 total on stock, but that doesn't include the tools and accessories that I had to buy.
- 2 - new 4-1/2" Angle Grinders
- 16 - 4-1/2" depressed centre Cut-off Wheels (almost $4.00 apiece - not on sale this month )
- 1 - new Sawz All
- 1 - new 14" Steel Cut-Off Saw
- 4 - new 27" Steel Saw Horses (2 pair)
- Pneumatic Stip Nails - 2-3/16"' and 3-1/4"
- Windows, 2" x 6", 1" x 2", 1" x 3", - good deals
Plywood is free - just had to recycle some old sign faces my brother-in-law gave me. So far I have 88 4'-x10' exterior grade douglas fir plywood sheets for sheathing. Gonna be a nice barn. Got the first row of sheets up today before the storm started.
And I need sliding barn door hardware and the track. I remember seeing it at Princess last year ... seemed to be a stock item. Will have to check the Co-Op too I guess. I can't even remember what the stuff is actually called. All I know is that it uses a rectangular steel tube or inverted C-Channel.. has dolly wheels up top with levellers and guide wheels on the bottom that runs against the building... I want to build on 8 foot x 9 foot sliding door...
I got more pics downloaded and uploaded from Em's camera.. but it is too late to post tonight. I am bushed.. So far it has been a great couple of weeks.
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship
-
- Team Cub
- Posts: 17279
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
John *.?-!.* cub owner wrote:before you cut the cords up, check local electrical codes, if any. most prohibit extension cords in a permanent or wired in application.
Key word there is local. If it isn't allowed, it can be done with a full extension cord plugged in with a clip (like used with freezers) to keep the plug from coming out.
-
- Similar Topics
- Replies
- Views
- Last post
-
- 5
- 369
-
by Pap
Wed Jul 21, 2021 4:11 pm
-
-
Home from The Tug and Thank You
by Don McCombs » Sun Jul 31, 2022 8:53 am » in CubFest and Tractor Show Announcements & Discussions - 3
- 209
-
by Bob McCarty
Sun Jul 31, 2022 4:44 pm
-
-
- 46
- 10809
-
by Pothole31a
Fri Feb 02, 2024 6:07 pm
-
-
Home From The Bash
by Don McCombs » Sun Jun 05, 2022 1:39 pm » in CubFest and Tractor Show Announcements & Discussions - 6
- 307
-
by Greenthumbfarms
Mon Jun 06, 2022 2:52 pm
-
-
- 9
- 1568
-
by Glen
Fri Nov 10, 2023 7:55 pm
Who is online
Users browsing this forum: No registered users and 1 guest