[phpBB Debug] PHP Warning: in file [ROOT]/includes/functions.php on line 4493: ob_start(): output handler 'ob_gzhandler' conflicts with 'zlib output compression'
Farmall Cub • View topic - majic paint trial

majic paint trial

Fri Mar 01, 2013 11:17 pm

First the disclaimer...I am not nor have ever been trained as a paint person. I have painted a few cars in the past, simply by following directions and good advice from people in the profession. They turned out very well, and I was pleased with the results.

I also tend to try things to make up my own mind about products, so I decided to try the majic paint that no one seems to care for. It was dirt cheap as far as paint goes, and since I am painting my tractor for rust protection and not for show purposes I didn see any big loss if it turned out to be crap.

Long story short, I applied it with an HVLP gun, and when mixed per the instructions (using majic reducer and majic hardener) it didnt spray well until i increased the pressure at the gun. Of course its a $30 knockoff, so the gun could be that problem. The paint did dry (that was mixed and spray applied), but the steel stock I used to stir the paint still had uncured paint on it after a week, so my advice is if you plan to use it, unless you use the hardner, I would probably leave it be.

Just my two Abrahams....

Re: majic paint trial

Sat Mar 02, 2013 12:13 am

I just saw that this paint showed up in my local TSC, I likedd the valspar they had but my favorite is the Van Sickle that you can find. I ve had great experiences with it.

Re: majic paint trial

Sat Mar 02, 2013 8:07 am

I would leave Majic Paint on the shelf....just my 2 cents worth.

Re: majic paint trial

Sat Mar 02, 2013 10:39 am

I am not impressed with Majic paint. With the price of IH Case Iron Gaurd paint, I don't feel that you can beat it. Just my Image

Re: majic paint trial

Sat Mar 02, 2013 8:18 pm

When I first read this post I thought there was some sort of legal trial going on. :lol: :lol:

With all the complaints that has been posted on the forum, it would not surprise me! :lol: