I am looking to get a blaster set up, I have a 5hp 80 gal 17 cfm compressor. I have a small bucket blaster but the sand is always getting clogged up in the hose. It is as if it is sucking in all the sand at once. So which is better, the tank or open bucket version?
I did start to just pull it out of the bucket one day, it worked better for a while but soon it was back to the same old same clog and nothing comes out.
Suggestions, should I try to reduce to hole in the bottom of the bucket some? just a thought to get it to the point where it won't pull so much sand.
Thanks
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Which sand blaster works better
Forum rules
Unwarranted FLAME reviews will be deleted without notice. Members are encouraged to exhaust all arbitration efforts with the companies before posting negative reviews here.
FarmallCub.Com and the moderators are not responsible for member reviews of businesses and attractions.
Send issues regarding reviews to Cub@farmallcub.com.
Unwarranted FLAME reviews will be deleted without notice. Members are encouraged to exhaust all arbitration efforts with the companies before posting negative reviews here.
FarmallCub.Com and the moderators are not responsible for member reviews of businesses and attractions.
Send issues regarding reviews to Cub@farmallcub.com.
-
- 10+ Years
- Posts: 916
- Joined: Sun Feb 02, 2003 10:44 pm
- Zip Code: 60936
- Tractors Owned: 47 Cub SN 8664
48 Cub
50 Demo
54 Cub
3-55 Cub
2-56 Cub
55 LOBOY SN 876
57 LOBOY
58 French Cub
2- 60 LOBOY
69 Cub
54 Super M
42 H
48 H
57 300LP
57 450
Cub Cadet 123
Cub Cadet 149 - Circle of Safety: Y
- Location: Gibson City, IL
- Contact:
- Don McCombs
- Team Cub Mentor
- Posts: 17479
- Joined: Mon Feb 03, 2003 6:45 am
- Zip Code: 21550
- Tractors Owned: "1950 Something" Farmall Cub
1957 Farmall Cub w/FH
1977 International Cub w/FH
1978 International Cub
1948 Farmall Super A - Circle of Safety: Y
- Location: MD, Deep Creek Lake
Re: Which sand blaster works better
Just a couple of suggestions. Your sand must be perfectly dry for any blaster to work, regardless of the type. So make sure your media is dry. Also, it is important that you have some means of removing moisture from your compressed air system. Both of these moisture sources will cause clogging problems.
Last edited by Don McCombs on Fri Apr 05, 2013 6:13 pm, edited 1 time in total.
- tmays
- 10+ Years
- Posts: 3410
- Joined: Wed May 11, 2011 8:59 pm
- Zip Code: 39154
- Tractors Owned: 1969 Farmall Cub
1952 Cub
1942 Farmall H - Location: Raymond, MS
Re: Which sand blaster works better
Also make sure there are no small rocks to clog it. I filter my sand with screen when I put it in tank
Thomas
- Bill V in Md
- 10+ Years
- Posts: 1124
- Joined: Sun Feb 02, 2003 6:51 pm
- Zip Code: 21228
- Tractors Owned: 1948 Farmall Cub
LT1045 Cub Cadet - Circle of Safety: Y
- Location: MD, Catonsville
- Contact:
Re: Which sand blaster works better
Jason,
I have a 10 gal. pressure tank sandblaster and it works very well for small jobs. One thing that really improved the operation was the addition of a small bowl type desiccant dryer. I picked up one from McMaster-Carr. The other thing I like about it is the desiccant can be removed, dryed in an oven and re-used. It does an excellent job of reducing moisture in the compressed air. Prior to that I was using filter type dryers with a couple of moisture traps in the piping runs, but the air line near the nozzle plugged frequently.
I have a 10 gal. pressure tank sandblaster and it works very well for small jobs. One thing that really improved the operation was the addition of a small bowl type desiccant dryer. I picked up one from McMaster-Carr. The other thing I like about it is the desiccant can be removed, dryed in an oven and re-used. It does an excellent job of reducing moisture in the compressed air. Prior to that I was using filter type dryers with a couple of moisture traps in the piping runs, but the air line near the nozzle plugged frequently.
Bill VanHooser
Cub 54 Blade, Cub 193 Moldboard Plow, Cub 28A Disc Harrow
Cub 54 Blade, Cub 193 Moldboard Plow, Cub 28A Disc Harrow
-
- 10+ Years
- Posts: 916
- Joined: Sun Feb 02, 2003 10:44 pm
- Zip Code: 60936
- Tractors Owned: 47 Cub SN 8664
48 Cub
50 Demo
54 Cub
3-55 Cub
2-56 Cub
55 LOBOY SN 876
57 LOBOY
58 French Cub
2- 60 LOBOY
69 Cub
54 Super M
42 H
48 H
57 300LP
57 450
Cub Cadet 123
Cub Cadet 149 - Circle of Safety: Y
- Location: Gibson City, IL
- Contact:
Re: Which sand blaster works better
I have a small moisture seperator so maybe I get a bigger one. I have used this little bucket blaster for 5 yrs and it seems I fight with it every time. So I was just wondering if I need to switch blaster units or not for better success.
Thanks
Jason
Thanks
Jason
-
- Team Cub
- Posts: 11854
- Joined: Tue May 25, 2004 8:02 pm
- Zip Code: 80501
- Tractors Owned: Cubs, MH Pony, Shaw, Allis G, 1934 Silver King, JD LA and LI, Gibson D, David Bradley Tri-Trac
- Circle of Safety: Y
- Location: CO, Longmont
Re: Which sand blaster works better
....or move to Colorado where dessicants, rust, and moisture problems are not in the vocabulary.
Bob
Bob
"We don't need to think more,
we need to think differently."
-Albert Einstein
we need to think differently."
-Albert Einstein
- bob in CT
- Team Cub Mentor
- Posts: 6018
- Joined: Thu Jun 07, 2007 9:34 am
- Zip Code: 06040
- Tractors Owned: 77 Cub (red); 74 Cub; 52 Cub; 50 Cub ( post-demo)
- Circle of Safety: Y
- Location: CT, Manchester
Re: Which sand blaster works better
The ideal air system has as long a run as possible from the compressor using iron pipe with a pitch to it and a good drip leg with a drain valve. A filter set with a final desiccant that can be regenerated is the ticket as suggested and that should come off the vertical line going down to the drip leg. Sand blasting gobbles air and the pipe run gives a chance to condense out moisture to lighten the load on the dryer train that usually condenses in the tank under smaller demand. Then you need to size the blast nozzle to match your air supply- but is sure sounds like moisture is the issue.
- John *.?-!.* cub owner
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
Re: Which sand blaster works better
Most of the open bucket type systems I have seen, have a hole in the side of the fitting that goes into the bucket. Make sure the suction hose is not covering that hole.
If you are not part of the solution,
you are part of the problem!!!
you are part of the problem!!!
- Bezirk
- 10+ Years
- Posts: 2010
- Joined: Fri Mar 27, 2009 10:07 pm
- Zip Code: 22843
- Tractors Owned: Farmall Cub 1949, Oliver OC3 crawler 1951, Ford 8 N 1948, Oliver 77 Row Crop 1953, JohnDeere, La, 1941, John Deere 4115/w loader, 2004, John Deere stationary power unit LUC, Farmall M, 1946, Oliver 77 Row crop w/ loader
- Circle of Safety: Y
Re: Which sand blaster works better
I would suggest Texas Blaster if you want a good quality pressurized unit, they are pricey, but very well made ( here in the U. S. oF A . ) if you can imagine that.
http://www.texasblaster.com
Berlin
http://www.texasblaster.com
Berlin
I started out with nothing and now I only have half of that left !
- Boss Hog
- Cub Pro
- Posts: 10290
- Joined: Mon Oct 24, 2005 8:35 pm
- Zip Code: 23962
- eBay ID: dmb2613
- Circle of Safety: Y
- Location: VA. Randolph
Re: Which sand blaster works better
I run my blast cabinet with 200 feet of hose and 3 traps one at the cabinet , drain your tank of water on a regular basis. that may solve your problem, or at lest help it
Boss
Boss
IN GOD WE TRUST
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
Return to “Tool Talk and Reviews”
Who is online
Users browsing this forum: No registered users and 7 guests