Fri Oct 05, 2012 5:23 pm
I needed a couple of copies of parts that Steiner carried, so I called and placed my order. Those puppies were in our house before noon the next day. Needless to say, I'm very pleased with the prompt service and the parts were great, as well.
Sat May 04, 2013 6:00 am
Bought 4 ,1 inch by 5/8 bolts from them recently....They charged 9.50 shipping to send them in a 5.45 "if it fits it ships Usps box"...I questioned them, they said the computer figures the shipping on the size of the box ????....Different kind of answer than I expected....First and last order....Dave
Sat May 04, 2013 7:50 am
Have been ordering from Steiner for about six years now and have always had great service. Normally three days shipping to my door. Shipping costs however are another story. The business I work for does some shipping. They do a lot of flat rate shipping. Sometimes he makes a little on shipping, most of the time he breaks even and sometimes he loses a little. I am not justifying Steiners rate but most flat rate minimums are $9.50 some are even higher.
Thu Jun 27, 2013 2:23 pm
Yeh, being a bit hot-headed
and after reading this post again, I ordered 3 brake/clutch return springs...Only needed one but shipping was the same for 3 as for 1....They were 5.95 each which was the cheapest I could find in a brief look see....They were here in 4 business days...So I reconsidered and didn't even ask about the shipping rate...Thats my story and I'm stickin to it....
Thu Jun 27, 2013 9:35 pm
Made 3 orders over the last few weeks for the MV I am working on. Very pleased with Steiner. Fast shipping too.
Mon Nov 18, 2013 1:43 pm
Can't say I like there after market oil pressure gauge's, Returned one of them. and got a replacement & it's crap also.
Sat Nov 23, 2013 10:43 pm
I had the same experience. Ordered an oil pressure gauge and it looked like Chinese crap and broke during installation. Hard to tell whats quality and whats junk from pictures on a web site. I learned quick that I need to make every effort to repair the origional parts if at all possible. I also decided that I prefer to drive to a parts dealer to see the parts I'm buying even if its going to cost me alot more in gas than postage. Buyer beware on the net.
Sun Nov 24, 2013 11:35 am
While I had the hood off the Lo Boy I replaced the ammeter. The one from Steiner was cheaper, made in USA (something is still made in CT!) and arrived quickly. My mistake was getting 60 amp, the needle hardly moves. I should have gotten the 30 amp. For double the money you can get one that says IH.http://www.steinertractor.com/ABC109-un ... auge-30030
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.