Reproduction IH Carb - Two Thumbs Up
Posted: Tue Jul 10, 2012 9:02 am
Well a few monnths ago I broke down and bought a new carbuerator off of Ebay. It was one of the reproduction IH carbs. When I first installed it it would crank very easily but then die after about 20 to 30 seconds. I took it apart and adjusted the float travel and that solved that issue. I have been running it ever since and just wanted to say that it is working very well and I am very pleased with it. Other than adjusting the float travel it has been hands off wonderful.
Just wanted to share my experience with this reproduction carb
CPIII
Just wanted to share my experience with this reproduction carb
CPIII