viewtopic.php?f=4&t=40447
Ok.. so I finally got a chance to use my mig and I got to say it as Borat would… niiiiice. I had a lot of fun playing around with the voltage and wire feed rate to see what worked best for the metal I was working on. It was also nice to see how the bead changed due to adjusting these two variants.
I took all the welds I made and put them in a vice and started to beat them profusely with a hammer to see if they would hold. To my surprise even my crap welds brought on by inexperience seem to make the cut and held there bond. I did not have any gas to try it with the non flux core wire but I feel pretty sure that there welds would be as least as good if not better. Also one more thing, whoever said that using Pam cooking spray as a anti splatter for your tips was a smart man. I am more than ¾ of the way through on my 10lb real of flux core wire and my welding tip looks just as clean after I wipe it as it did brand new. I had a lot of fun with this tool which you will see is pretty much indicative of the reviews on northern tool web site.
I would highly recommend this to any one as their first mig welder and I would buy it again. I have a few projects on my list that I will hopefully soon start after I get my root cellar in and purchase some metal to work with, because we all need something else to spend our money on.
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Northern tool MIG 135 review
Forum rules
Unwarranted FLAME reviews will be deleted without notice. Members are encouraged to exhaust all arbitration efforts with the companies before posting negative reviews here.
FarmallCub.Com and the moderators are not responsible for member reviews of businesses and attractions.
Send issues regarding reviews to Cub@farmallcub.com.
Unwarranted FLAME reviews will be deleted without notice. Members are encouraged to exhaust all arbitration efforts with the companies before posting negative reviews here.
FarmallCub.Com and the moderators are not responsible for member reviews of businesses and attractions.
Send issues regarding reviews to Cub@farmallcub.com.
-
- 10+ Years
- Posts: 231
- Joined: Fri Mar 14, 2008 11:32 am
- Zip Code: 51557
- eBay ID: spec [77]
- Tractors Owned: 52 cub
40ish Farmall M with JD bucket - Location: Mondamin Iowa
-
- Similar Topics
- Replies
- Views
- Last post
-
-
interesting review of 6 volt batteries Attachment(s)
by inairam » Tue Sep 05, 2023 10:22 pm » in Farmall Cub - 15
- 990
-
by Jim Becker
Thu Sep 14, 2023 8:56 am
-
-
-
A quick review of the '71 and the advantage of the Cub for cultivating Attachment(s)
by Super A » Thu Jun 02, 2022 9:47 am » in Farmall Cub - 7
- 370
-
by CapeCodCubs
Sun Jun 05, 2022 11:11 pm
-
-
- 2
- 168
-
by Cooter
Wed May 08, 2024 8:52 pm
-
- 15
- 745
-
by Don McCombs
Wed Oct 27, 2021 3:19 pm
-
- 33
- 7591
-
by Eugene
Wed Sep 14, 2022 10:34 pm
Return to “Tool Talk and Reviews”
Who is online
Users browsing this forum: No registered users and 2 guests