Does anyone have this bandsaw?

[Greenthumbfarms]

We are looking to get a bandsaw for the farm shop. I do enough fabrication for the farm that the steel chop saw isn't good enough when working with thicker metals.
I wasn't looking to spend too much and wondered if anybody had used this one and can offer an opinion. I know HF tools are hit or miss, but this is significantly cheaper than the name brand equivalent.

https://www.harborfreight.com/horizonta ... 93762.html

[tst]

I have one that is 15 years old and I use it a lot, would recomend take and red locktite all the hardware as it fell apart from vibration, buy good bimetal blades and it will do well for you

[ajhbike]

I bought the Bauer hand held hack saw and it works really well for around $100 or so. Lets me cut anything anywhere as long as it is accessible. I do use cutting oil when cutting although it isn't mentioned anywhere in the manual.

[Eugene]

https://www.amazon.com/DEWALT-DCS374B-D ... 97444&th=1

Own the above linked portable band saw. Works great. If the steel is very thick, may have to cut in two different directions.

[ajhbike]

That's a nice one being cordless. Either one...the portable was the way to go for me...I cut 1/2 steel angle and plate all the time.