Anyone have any luck with lawn rollers? 48" wide or wider- plastic ? steel? what stores? Any recommendations?
I need one , the moles have been really bad last few years.
I will be pulling it with my Cub while mowing with the 59 woods.
Thanks
John
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
lawn rollers
-
- 10+ Years
- Posts: 1774
- Joined: Thu Oct 26, 2006 7:17 pm
- Zip Code: 44657
- Circle of Safety: Y
- Location: Minerva,Ohio
lawn rollers
'49 Cub (Vince)
'41 allis B with Woods L59 mower
656 Wheel Horse with 42” sickle mower
C-165 Wheel Horse
Simplicity 20 HP Sunstar
Honda 48” walk behind mower
'41 allis B with Woods L59 mower
656 Wheel Horse with 42” sickle mower
C-165 Wheel Horse
Simplicity 20 HP Sunstar
Honda 48” walk behind mower
-
- Team Cub Mentor
- Posts: 20336
- Joined: Fri Jul 02, 2004 9:52 pm
- Zip Code: 65051
- Circle of Safety: Y
- Location: Mo. Linn
Re: lawn rollers
I have owned a plastic lawn roller for perhaps 10 years. Guessing, 36" wide. Towed with a 10 or 12 HP Cub Cadet. Works great. No problems.
Don't recall the store where purchased. Guessing one of the big box hardware stores.
Only thing with any lawn roller is to make sure you drain the roller after each use.
Don't recall the store where purchased. Guessing one of the big box hardware stores.
Only thing with any lawn roller is to make sure you drain the roller after each use.
I have an excuse. CRS.
- ricky racer
- 10+ Years
- Posts: 6303
- Joined: Wed Sep 12, 2007 8:40 pm
- Zip Code: 49120
- Circle of Safety: Y
- Location: Niles / Buchanan, Michigan
Re: lawn rollers
Eugene wrote:Only thing with any lawn roller is to make sure you drain the roller after each use.
Mine is filled with used crankcase oil. No need to drain and it won't rust out. Mine is home made, made by my dad and a neighbor. It's about 50" wide and about 2 feet in diameter.
1929 Farmall Regular
1935 John Deere B
1937 John Deere A
1941 John Deere H
1952 John Deere B
1953 Farmall Cub
1935 John Deere B
1937 John Deere A
1941 John Deere H
1952 John Deere B
1953 Farmall Cub
-
- Team Cub
- Posts: 11817
- Joined: Tue May 25, 2004 8:02 pm
- Zip Code: 80501
- Tractors Owned: Cubs, MH Pony, Shaw, Allis G, 1934 Silver King, JD LA and LI, Gibson D, David Bradley Tri-Trac
- Circle of Safety: Y
- Location: CO, Longmont
Re: lawn rollers
John, If you want to fab one, I'd bet you could find a free 100 lb propane tank with the old style valve.
Bob
Bob
"We don't need to think more,
we need to think differently."
-Albert Einstein
we need to think differently."
-Albert Einstein
-
- 10+ Years
- Posts: 2212
- Joined: Mon May 15, 2006 4:26 am
- Zip Code: 12487
- Circle of Safety: Y
Re: lawn rollers
I have an antique roller it will never leak its all iron probably 100 years old.
Moles have you put GrubX down , one application per season and moles go away that's their food supply, if the don't leave there something else possibly Voles
Moles have you put GrubX down , one application per season and moles go away that's their food supply, if the don't leave there something else possibly Voles
-
- 10+ Years
- Posts: 2783
- Joined: Tue Jul 22, 2008 12:44 pm
- Zip Code: 48370
- Tractors Owned: 184
- Location: Oxford, MI
Re: lawn rollers
I roll my yard with a 48" x 24" steel roller that I fill with water (and drain after use). My 184 tractor is heavier per square inch than the roller so when in soft areas, the tires can leave grooves in the yard that the roller can't fix. Be careful about how wet the yard is. The ground moisture needs to be just right to work properly. I find it best to roll the top of a hill after a good soaking rain, but wait a few days after the rain to do the bottom of a hill (or a low area).
184 w/ Creeper & 3-Point
IH 3160a Mower
IH Model 15 Tiller
IH-54 Blade
IH 3160a Mower
IH Model 15 Tiller
IH-54 Blade
- John *.?-!.* cub owner
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
Re: lawn rollers
I have one I fixed up to pull behind my ZTR, but have found that mowing my yard with the Mott flail does a good job of discouraging moles. It weighs around 200 pounds, and the weight is carried on a 48 inch wide by 5 inch diameter cast iron roller. The combination of that covering every inch of the area along with the vibration of the flail running really discourages moles. As an experiment I only used the ZTR last year and did not mow any of the yard with the Mott. I am noticing the moles coming back already with the unusually warm weather we are having, so I will soon be launching a flail attack.
If you are not part of the solution,
you are part of the problem!!!
you are part of the problem!!!
- Bill Hudson
- Team Cub
- Posts: 9513
- Joined: Wed Jul 26, 2006 10:50 am
- Zip Code: 44057
- Tractors Owned: 57 F-Cub - Dad & Mom's Cub
77 F-Cub - Red Long Stripe - Circle of Safety: Y
- Location: OH, Madison
Re: lawn rollers
John,
Seems that we have had this discussion before http://farmallcub.com/phpBB2/viewtopic.php?f=1&t=58614&p=483375&hilit=lawn+Roller#p483375
As for the moles, try applying a grub control product containing imidacloprid (trade name Merit) at the recommended label rate. Application on/near June 1, in your area, should provide adequate grub control and lessen (note, not eliminate) mole activity. As I recall, your property was not surrounded by a lot of trees, so this treatment might be all you need. If you have moved into a heavily wooded area, moles are a given and not much can be done short of trapping them.
Hope this helps.
Bill
Seems that we have had this discussion before http://farmallcub.com/phpBB2/viewtopic.php?f=1&t=58614&p=483375&hilit=lawn+Roller#p483375
As for the moles, try applying a grub control product containing imidacloprid (trade name Merit) at the recommended label rate. Application on/near June 1, in your area, should provide adequate grub control and lessen (note, not eliminate) mole activity. As I recall, your property was not surrounded by a lot of trees, so this treatment might be all you need. If you have moved into a heavily wooded area, moles are a given and not much can be done short of trapping them.
Hope this helps.
Bill
Who is online
Users browsing this forum: No registered users and 7 guests