Took a little nine hour round trip ride into Bill Hudson's territory today and picked up a big box.
Under the cover of darkness we opened the box and unloaded the contents into the shop.
This should come in real handy at the Bash next month.
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
New tool for the Bash!
- Barnyard
- Team Cub
- Posts: 24266
- Joined: Tue Aug 07, 2007 3:39 pm
- Zip Code: 45030
- Tractors Owned: At This Time
40 Farmall Cubs (Round Hood)
2 Farmall Cub (Square Hood)
2 IH Cubs (Square Hood)
5 Lo-Boys (Round Hood)
2 Lo-Boys (Square Hood)
2 Farmall 404's
1 Farmall H
1 Ferguson 20
1 Cub Cadet 125
1 Kubota B-7100 - Circle of Safety: Y
- Location: OH, New Haven (Hamilton County)
- Contact:
New tool for the Bash!
There are two ways to get enough Cubs. One is to continue to accumulate more and more. The other is to desire less.
- Bill Hudson
- Team Cub
- Posts: 9522
- Joined: Wed Jul 26, 2006 10:50 am
- Zip Code: 44057
- Tractors Owned: 57 F-Cub - Dad & Mom's Cub
77 F-Cub - Red Long Stripe - Circle of Safety: Y
- Location: OH, Madison
Re: New tool for the Bash!
I think you're gonna like it!
Bill
Bill
- dgrapes59
- 10+ Years
- Posts: 3732
- Joined: Sun Jul 13, 2008 10:05 pm
- Zip Code: 45067
- Tractors Owned: 1951 Cub, 2-1955 Loboy w FH, a few plows, discs, mowers, blades, carrier & such
Several '61 CC Originals, Cub Cadet 100, several 102's & 122's, 124, various CC options & implements, #1Trailer, 1963 Springfield, JD 770, Ford 8N - Circle of Safety: Y
- Location: OH, Trenton
- Winfield Dave
- 10+ Years
- Posts: 3558
- Joined: Thu Apr 22, 2010 2:31 pm
- Zip Code: 17953
- Tractors Owned: ......Almost enough.
N3NIK - Circle of Safety: Y
- Location: PA, Middleport (Schuylkill County)
Re: New tool for the Bash!
Giant Easy-Bake Oven ??
Dave
"More gold has been mined from the thoughts of men than has been taken from the earth." -- Napoleon Hill
"More gold has been mined from the thoughts of men than has been taken from the earth." -- Napoleon Hill
-
- 10+ Years
- Posts: 2929
- Joined: Sun Apr 19, 2009 9:51 pm
- Zip Code: 63664
- Location: MO, Potosi
Re: New tool for the Bash!
A DONUT MACHINE? Powered from the left hole in front, glazed on the right, window for viewing?
- Mr E
- Cub Pro
- Posts: 5762
- Joined: Mon Jul 30, 2007 11:48 am
- Zip Code: 32460
- eBay ID: noles1432460
- Circle of Safety: Y
- Location: FL, Sneads
- Contact:
Re: New tool for the Bash!
Nice !!!
No more wire brushing the steps, eh.
No more wire brushing the steps, eh.
In the middle of every difficulty lies opportunity. - Albert Einstein
.
Roy Edenfield
Deep South CubFest #10
February 14 & 15, 2020
.
Roy Edenfield
Deep South CubFest #10
February 14 & 15, 2020
- Barnyard
- Team Cub
- Posts: 24266
- Joined: Tue Aug 07, 2007 3:39 pm
- Zip Code: 45030
- Tractors Owned: At This Time
40 Farmall Cubs (Round Hood)
2 Farmall Cub (Square Hood)
2 IH Cubs (Square Hood)
5 Lo-Boys (Round Hood)
2 Lo-Boys (Square Hood)
2 Farmall 404's
1 Farmall H
1 Ferguson 20
1 Cub Cadet 125
1 Kubota B-7100 - Circle of Safety: Y
- Location: OH, New Haven (Hamilton County)
- Contact:
Re: New tool for the Bash!
Bill Hudson wrote:I think you're gonna like it!
Bill
Thanks for recommending them back in September.
dgrapes59 wrote:I will be glad to help you break it in!
I will probably have it broke in well before the Bash, but you are welcome to it whenever needed.
Mr E wrote:Nice !!!
Roy, I'm glad you had a similar one at DSCF, it convinced me to go with this type.
This one is a Skat Blaster Model 976 from TP Tools in Canfield Ohio. Made in the USA right at their location. It is big enough to hold a Cub hood or rear tire so it will do for just about anything I throw at it. I also picked up the optional extension that attaches to the left side which gives it an additional 16 inches of length for anything longer than a Cub hood.
There are two ways to get enough Cubs. One is to continue to accumulate more and more. The other is to desire less.
-
- Team Cub Mentor
- Posts: 5634
- Joined: Thu Aug 03, 2006 6:20 am
- Zip Code: 43358
- Tractors Owned: 48 Cub Diesel (Cubota)
53 Cockshutt 20 restored (Shooter)
52 Cockshutt 20 unrestored
47 Leader "B" (Herckie)
49 Leader "D" (Princess)
49 Leader "D" very rough
48 Leader "D" unrestored
Kubota B6200E
Kubota B6200HST
Kubota B8200HST-D - Circle of Safety: Y
- Location: OH West Mansfield
Re: New tool for the Bash!
Very nice, Bill! You're going to like it a lot! TP is well known for top quality cabinets and their service on parts & supplies is second to none. Even though my cabinet did not come from them, my parts & supplies do.
-
- Cub Pro
- Posts: 7506
- Joined: Thu Aug 31, 2006 7:00 pm
- Zip Code: 02769
- Tractors Owned: 6"F" cubs
5 lo-boys
1 154
1 184
1 IH444
1 Oliver OC3 crawler
1 AC D10
1 IH 100 manure spreader
1 IH model B corn grinder
3 power units
cub demonstrator - Circle of Safety: Y
- Location: Ma. Rehoboth
Re: New tool for the Bash!
Tp makes top quality stuff, and are good to deal with. Ed
- Barnyard
- Team Cub
- Posts: 24266
- Joined: Tue Aug 07, 2007 3:39 pm
- Zip Code: 45030
- Tractors Owned: At This Time
40 Farmall Cubs (Round Hood)
2 Farmall Cub (Square Hood)
2 IH Cubs (Square Hood)
5 Lo-Boys (Round Hood)
2 Lo-Boys (Square Hood)
2 Farmall 404's
1 Farmall H
1 Ferguson 20
1 Cub Cadet 125
1 Kubota B-7100 - Circle of Safety: Y
- Location: OH, New Haven (Hamilton County)
- Contact:
Re: New tool for the Bash!
Gary Dotson wrote:TP is well known for top quality cabinets and their service on parts & supplies is second to none.
ScottyD'sdad wrote:Tp makes top quality stuff, and are good to deal with. Ed
Gary and Ed - There is no doubt in my mind on that! When I was looking over there website Sunday I decided to get the caster assembly so I can move it around to clean and such.
I could have made a set, but they would never look like they belonged so I gave TP a call. I first talked to the lady about 1:30 yesterday afternoon to place the order. They have a standard set and an extra high set. Thinking that since I have the extra high cabinet, I needed the extra high set. After I got the email confirmation I notice that the extra high set actually meant that it raised the cabinet an extra height and not actually needed for the extra high cabinet. I called back at 2:15 and the lady confirmed that was the case. She said there was no problem and made the change and sent my new confirmation. A couple hours after that I received a UPS tracking number.
This morning I checked the tracking number and saw this:
Just awhile ago the dogs started carrying on so I went out to see who was here. When I got to the door I saw the brown truck headed out the drive and my package was by the garage door.
Hard to believe the order went out yesterday afternoon and they got it on a truck before they closed. Start to finish in less than twenty four hours. I like this outfit.
There are two ways to get enough Cubs. One is to continue to accumulate more and more. The other is to desire less.
Who is online
Users browsing this forum: No registered users and 13 guests