Anything that might not belong on the other message boards!
Moderator: Team Cub
1. Keep it clean.
2. Keep the discussion civil.
3. Name calling is not allowed.
Politics and religion are two topics that tend to degenerate into a violation of one of the three simple rules above.
The mods and the site admin reserve the right to "lock" or "delete" any discussion that in our opinion, is "heading in the wrong direction."
MOST of all, be respectful of your fellow Cubber's opinions. Don't expect to change someones belief system from a simple forum on the internet.
10 posts • Page 1 of 1
Has anyone used a tail pipe expander from any autoparts stores? I have two pipes that are both 2 3/8" and I want to flare one to go in the other. The pipes are fence corner posts that are 16 guage.
Yes they work well. In fact, I wound up buying one because I found the chain cutter just as useful to have around as the pipe expanders. I was wasting too much time running up to auto parts to borrow theirs when I needed to fit pipe.
Ran around $75.00 if I remember. The set does have a lifetime warranty, the only catch is you have to ship the broken piece to TX. for exchange, which I did have to do with the large expander. I was probably asking too much of it when one expansion piece snapped.
"HAVE ALL YOUR DELIVERIES MADE BY UNION DRIVERS"
Take it to a muffler shop with a hydraulic expander. My experience with the manual version is they are good for making the pipe round, not so good at expanding. Hard to hang on to the pipe and you end up making the expansion funnel shaped.
I was going to make the same suggestion as Scrivet. Your fence post pipe is heavier gauge than most tail pipes, and the manual expander may not work well. The hydraulic rigs that the muffler shops have will handle much heavier pipe. I know you did not ask about this part, but in my area the muffler shops will do an exhaust job including labor cheaper than what I can buy the parts at a parts store.
"The Constitution is not an instrument for the government
to restrain the people, it is an instrument for the people to restrain the
government lest it come to dominate our lives and interests." Patrick Henry
Why not get one end crimped so it will go into the other like chain link fence top rail?
I don't believe in taking the bull by the horns. I took a goat by the horns once and that was enough excitement for me.
Barnyard Bash CubFest May 31 - June 1, 2013
Click here for info.
Take it to a muffler shop it will make it easier on yourself. Just my 2c.
In my line of work
" EVERYBODY GOES HOME THE NEXT MORNING"
I found a local muffler shop , he said he could do it for a couple of bucks. we shall see if it works.
10 posts • Page 1 of 1
Who is online
Users browsing this forum: No registered users and 1 guest