Anything that might not belong on the other message boards!
1. Keep it clean.
2. Keep the discussion civil.
3. Name calling is not allowed.
Politics and religion are two topics that tend to degenerate into a violation of one of the three simple rules above.
The mods and the site admin reserve the right to "lock" or "delete" any discussion that in our opinion, is "heading in the wrong direction."
MOST of all, be respectful of your fellow Cubber's opinions. Don't expect to change someones belief system from a simple forum on the internet.
Sat Nov 17, 2012 6:07 pm
I had breakfast with a friend who had several 12 V cordless drill batteries rebuilt at the Interstate Battery store. The cost was 1/2 of what a new one would be and he claims that the new batteries last longer and have more power than the OEM's. They open the case and replace the dead ones. I didn't know that this could be done.
Sat Nov 17, 2012 6:25 pm
You can rebuild some of the NiCad or NiMH yourself but I think the lithium-ion batteries are different and need to go to a shop. Rebuilds are available on ebay but I think I would trust a reputable rebuilder such as Interstate
Sat Nov 17, 2012 7:28 pm
Before rebuilding your weak batteries, contact the manufacturer to see if the batteries might be on a recall list. I have had (2) 14 volt and (2) 18 volt replaced by Milwaukee free of charge. In fact the shipping was paid for by Milwaukee too.
Knowing which batteries were on the recall list got me a great deal on a 18 volt Milwaukee Sawzall at a garage sale. The Sawzall was being sold because the batteries were no good and the cost of replacing the batteries was near the price of a complete new saw. I got the saw for $15 and contacted Milwaukee with the serial numbers of the batteries. They were on the recall list. Milwaukee sent me a package to mail the batteries back in and promptly sent me 2 new batteries.
Sat Nov 17, 2012 7:36 pm
I like that.
I am hoping for the DeWalt Drill and Driver deal for Christmas. Been considering the Milwaukee as well. I like Milwaukee corded tools and think they are equally as good as the DeWalt pro line. I am hoping that the cordless ones are the same
Sat Nov 17, 2012 9:12 pm
I had a pair of 18 volt Skil batteries rebuilt by Interstate about 4 or so years ago. They cost almost as much as new ones, and only lasted about 6 months. i was not happy.
Sat Nov 17, 2012 9:51 pm
Don't know if my experience was typical, or not. I had a 14 volt Craftsman rebuilt by a local company that specializes in batteries, of all kinds. Batteries is all they do. My end result parallels John's. I was not a happy camper and have not been back.
Sat Nov 17, 2012 9:54 pm
I have had several batteries rebuilt at school lately, I will say I will just go buy new one for now on, the rebuilds are about $3 per volt from Interstate here. I find them on line for cheaper new, so I go that route now.
Sat Nov 17, 2012 10:02 pm
18 volt DeWalt rebuilt batteries. Purchased/exchanged a couple of batteries from a "rebuilder' for a bit less than the cost of new batteries at the store. I won't do that again. Results were less than satisfactory.
Sun Nov 18, 2012 7:48 am
I've never had any batteries rebuilt, I've heard too many negative results like the others here have mentioned. I have several 18V Dewalt tools and I try to buy one new battery every year. I can usually find them for about $50 each for the XRP's. The two batteries that came with my first Dewalt drill, 9 yrs. ago, have just recently expired. I feel they have served me very well. I do love my Dewalt cordless tools!
Thu Nov 22, 2012 11:53 am
Gary Dotson wrote:I've never had any batteries rebuilt, I've heard too many negative results like the others here have mentioned. I have several 18V Dewalt tools and I try to buy one new battery every year. I can usually find them for about $50 each for the XRP's. The two batteries that came with my first Dewalt drill, 9 yrs. ago, have just recently expired. I feel they have served me very well. I do love my Dewalt cordless tools!
I use Dewalt in my shop as well and have always been pleased with the performance (even though it is a glorified B&D), nowadays if you shop at the right time, an 18V drill w/ two batteries can be bought for $99, they sell the individual batteries for $70-$80 each around here.
Thu Nov 22, 2012 3:28 pm
[/quote]I use Dewalt in my shop as well and have always been pleased with the performance (even though it is a glorified B&D), nowadays if you shop at the right time, an 18V drill w/ two batteries can be bought for $99, they sell the individual batteries for $70-$80 each around here.[/quote]
For that very reason, you can buy used battery powered equipment (without the batteries) on e-bay, cheap. If you've got batteries at home, sometimes you can pick up other tools cheaply.
Thu Nov 22, 2012 5:50 pm
I use nicads in my R/C aircraft, these are basically the same as used in cordless equipment. The difference is in the number of cells and capacity. Because so much is at stake in a flight session, we monitor and cycle batteries in the off-season. (now) I use a cycler which discharges and recharges at the rate selected. You may have to fully discharge and recharge several times to develop rated capacity. I would try it before giving up on the rebuilt battery packs. The worst thing is lack of use. You may want to look inside the case to see if the rebuilder replaced with the same capacity cells.
Just my 2 cents worth...
Thu Nov 22, 2012 6:01 pm
I've even re-purposed drill batteries which are sub-c size for use in my starter pack. Disassembly and checking with a volt meter will usually indicate dead cells.
Nickel metal hydride and Lipo's are the coming things, but require different charging equipment, and caution. I haven't needed to convert anything yet, but Nicads are on their way out, so I've been told. Sorry to ramble..
Thu Nov 22, 2012 9:22 pm
Years ago I got the 5 tool 18V DeWalt kit. Love it but the batteries seem to expire at 3 years. I have been buying 'reman' kits with batteries, chargers, case etc. Sometimes cheaper than the batteries and get a tool out of the deal. Love the big impact, surprising power! Last set I got was a lithium drill & impact driver set, $190 delivered. Toolking.com has some decent specials.
Thu Nov 22, 2012 9:58 pm
Something to think about. Most rebuilders only replace the bad cells in a battery. If the other cells test good they leave them alone. It's cheaper for the rebuilder that way. Just because the other cells test good does not mean they won't fail in a short period of time. You could have a bad rebuilt battery in a few weeks.
The same usually goes for rebuilt power tools. Some rebuilders only replace what is known to be bad. Something else could fail soon after it leaves their shop. A lot of rebuilt tools give good service long after a rebuild but always remember, you are still buying a used piece of equipment.
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.