grease fittings

Anything that might not belong on the other message boards!

Moderator: Team Cub

Forum rules
1. Keep it clean.
2. Keep the discussion civil.
3. Name calling is not allowed.

Politics and religion are two topics that tend to degenerate into a violation of one of the three simple rules above.

The mods and the site admin reserve the right to "lock" or "delete" any discussion that in our opinion, is "heading in the wrong direction."

MOST of all, be respectful of your fellow Cubber's opinions. Don't expect to change someones belief system from a simple forum on the internet.
User avatar
birddog
10+ Years
10+ Years
Cub Star!!
Cub Star!!
Posts: 432
Joined: Fri May 05, 2006 12:00 am
Zip Code: 54515
Circle of Safety: Y
Location: WI, Catawba

grease fittings

Postby birddog » Mon Jun 11, 2012 5:36 pm

Do these type of grease fitting have a special name and do you use a special end or just a needle point.

Image
Mark "birddog" Birdeau
Circle of Safety

Bob McCarty
Team Cub Mentor
Team Cub Mentor
501 Club
501 Club
Posts: 7587
Joined: Tue May 25, 2004 8:02 pm
Zip Code: 80501
Tractors Owned: Cubs, MH Pony, Shaw, Allis G, 1934 Silver King, JD LA and LI, Gibson D, David Bradley Tri-Trac
Circle of Safety: Y
Location: CO, Longmont

Re: grease fittings

Postby Bob McCarty » Mon Jun 11, 2012 5:49 pm

Called a "pin-type". Here's a link: http://www.mbfittings.com/pin_type.htm

Bob
"We don't need to think more,
we need to think differently."
-Albert Einstein

User avatar
birddog
10+ Years
10+ Years
Cub Star!!
Cub Star!!
Posts: 432
Joined: Fri May 05, 2006 12:00 am
Zip Code: 54515
Circle of Safety: Y
Location: WI, Catawba

Re: grease fittings

Postby birddog » Wed Jun 13, 2012 5:29 pm

Thanks Bob.
Mark "birddog" Birdeau
Circle of Safety


Return to “Off Topic”

Who is online

Users browsing this forum: No registered users and 0 guests