This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link:
Privacy Policy

NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.

Tool Descriptions

Anything that might not belong on the other message boards!
User avatar
dracer398
10+ Years
10+ Years
Posts: 250
Joined: Wed Nov 09, 2005 11:31 am
Zip Code: 48706
Location: Michigan-Bay City
Contact:

Tool Descriptions

Postby dracer398 » Sat Nov 19, 2005 12:04 pm

Hi All,

Before working on your tractor, everyone should know the proper usage of their tools. :-)



DRILL PRESS: A tall upright machine useful for suddenly snatching flat metal bar stock out of your hands so that it smacks you in the chest and flings your beer across the room, splattering it against that freshly painted tractor part you were drying.

WIRE WHEEL: Cleans paint off bolts and then throws them somewhere under the workbench with the speed of light. Also removes fingerprint whorls and hard-earned guitar calluses in about the time it takes you to say, "Ouch...."

ELECTRIC HAND DRILL: Normally used for spinning pop rivets in their holes until you die of old age.

PLIERS: Used to round off bolt heads.

HACKSAW: One of a family of cutting tools built on the Ouija board principle. It transforms human energy into a crooked, unpredictable motion, and the more you attempt to influence its course, the more dismal your future becomes.

VISE-GRIPS: Used to round off bolt heads. If nothing else is available, they can also be used to transfer intense welding heat to the palm of your hand.

OXYACETYLENE TORCH: Used almost entirely for lighting various flammable objects in your shop on fire. Also handy for igniting the grease inside the wheel hub you want the bearing race out of.

WHITWORTH SOCKETS: Once used for working on older British cars and motorcycles, they are now used mainly for impersonating that 9/16 or 1/2 socket you've been searching for the last 15 minutes.

HYDRAULIC FLOOR JACK: Used for lowering an automobile to the ground after you have installed your new disk brake pads, trapping the jack handle firmly under the bumper.

EIGHT-FOOT LONG DOUGLAS FIR 2X4: Used for levering an automobile upward off a hydraulic jack handle.

TWEEZERS: A tool for removing wood splinters.

PHONE: Tool for calling your neighbors to see if he has another hydraulic floor jack.

SNAP-ON GASKET SCRAPER: Theoretically useful as a sandwich tool for s preading mayonnaise; used mainly for getting dog **** off your boot.

E-Z OUT BOLT AND STUD EXTRACTOR: A tool ten times harder than any known drill bit that snaps off in bolt holes you couldn't use anyway.

TWO-TON ENGINE HOIST: A tool for testing the tensile strength on everything you forgot to disconnect.

CRAFTSMAN 1/2 x 16 INCH SCREWDRIVER: A large prybar that inexplicably has an accurately machined screwdriver tip on the end opposite the handle.

AVIATION METAL SNIPS: See hacksaw.

TROUBLE LIGHT: The home mechanic's own tanning booth. Sometimes called a drop light, it is a good source of vitamin D, "the sunshine vitamin," which is not otherwise found under cars at night. Health benefits aside, it's main purpose is to consume 40-watt light bulbs at about the same rate that 105-mm howitzer shells might be used during, say, the first few hours of the Battle of the Bulge. More often dark than light, its name is somewhat misleading.

PHILLIPS SCREWDRIVER: Normally used to stab the lids of old-style paper-and-tin oil cans and splash oil on your shirt; but can also be used, as the name implies, to strip out Phillips screw heads.

AIR COMPRESSOR: A machine that takes energy produced in a coal-burning power plant 200 miles away and transforms it into compressed air that travels by hose to a Chicago Pneumatic impact wrench that grips rusty bolts last over tightened 58 years ago by someone at Farmall, and neatly rounds off their heads.

PRY BAR: A tool used to crumple the metal surrounding that clip or bracket you needed to remove in order to replace a 50¢ part.

HOSE CUTTER: A tool used to cut hoses too short.

HAMMER: Originally employed as a weapon of war, the hammer nowadays is used as a kind of divining rod to locate the most expensive parts not far from the object we are trying to hit.

MECHANIC'S KNIFE: Used to open and slice through the contents of cardboard cartons delivered to your front door; works particularly well on contents such as seats, vinyl records, liquids in plastic bottles, collector magazines, refund checks, and rubber or plastic parts.

DAMMIT TOOL: Any handy tool that you grab and throw across the garage while yelling DAMMIT**** at the top of your lungs. It is also the next tool that you will need.

EXPLETIVE: A balm, usually applied verbally in hindsight, which somehow eases those pains and indignities following our every deficiency in foresight.
and descriptions of the tools!
1951 Farmall Cub, 1979 International 184 with a 1050A Loader (Thanks JP Tractor salvage), 1945 Farmall H, 1934 & 1935 F-12's

SPONSOR AD

Sponsor



Sponsor
 

User avatar
jostev
10+ Years
10+ Years
Posts: 1254
Joined: Wed Aug 31, 2005 5:10 pm
Zip Code: 03574
eBay ID: farmallkid48
Skype Name: farmall_kid
Tractors Owned: 41 B
48 H
49 C
50 red demo Cub
51 C
52 Cub
54 Super C
61 and 63 Cub Cadet Originals
78 Cub Cadet 1450
73 154 lo-boy
Location: NH, Bethlehem
Contact:

Postby jostev » Sat Nov 19, 2005 1:04 pm

hahahahahaha :lol: That was very very very funny, seems to me that that is 100% true, well in this house it is :!: :!:

User avatar
dracer398
10+ Years
10+ Years
Posts: 250
Joined: Wed Nov 09, 2005 11:31 am
Zip Code: 48706
Location: Michigan-Bay City
Contact:

Tool descriptions

Postby dracer398 » Sat Nov 19, 2005 3:19 pm

That's the way it goes around here too! :lol:
1951 Farmall Cub, 1979 International 184 with a 1050A Loader (Thanks JP Tractor salvage), 1945 Farmall H, 1934 & 1935 F-12's

Bruce Sanford
10+ Years
10+ Years
Posts: 309
Joined: Sat Aug 07, 2004 11:08 am
Location: Enfield Nova Scotia

Postby Bruce Sanford » Sat Nov 19, 2005 4:56 pm

I would like to have a beeper for that tool I just laid down two minutes ago.Instead of looking for it ,for ten minutes. 8) :-:-): Bruce
owner of 48 fcub 34206 Cub cadets 108/102 with mower,snow thrower and blade

User avatar
Scott
10+ Years
10+ Years
Posts: 1194
Joined: Sun Dec 26, 2004 7:09 pm
Zip Code: 02769
eBay ID: scottdarowski
Tractors Owned: 48 Cub
55 Cub
62 CCO
63 CCO
70 JD 112
Location: MA, Rehoboth
Contact:

Postby Scott » Sat Nov 19, 2005 5:29 pm

100% true here
Image On To Bigger Things

Jim Becker
Team Cub
Team Cub
Posts: 17242
Joined: Sun Feb 02, 2003 2:59 pm
Zip Code: 55319
Circle of Safety: Y
Location: MN

Re: Tool Descriptions

Postby Jim Becker » Sat Nov 19, 2005 5:36 pm

dracer398 wrote:WIRE WHEEL: Cleans paint off bolts and then throws them somewhere under the workbench with the speed of light. Also removes fingerprint whorls and hard-earned guitar calluses in about the time it takes you to say, "Ouch...."


I thought this one was funnier before it was dumbed down:

Wire Whell: Cleans rust off old bolts and then throws them somewhere under the workbench with the speed of light. Also removes fingerprint whorls and hard-earned guitar callouses in about the time it takes you to say, "Django Reinhardt".

Here is another version of the list, worth a separate look:

http://www.emmitsburg.net/humor/daily_additions/2005/oct/28.htm

User avatar
Carm
10+ Years
10+ Years
Posts: 1085
Joined: Thu Aug 28, 2003 2:11 pm
Zip Code: 21234
Tractors Owned: 1947 FCub 1948 FCub (FrankenCub), 1949 C, 1952 SA, 1963 IH 3414 Backhoe Diesel, 1960 Oliver 880 Diesel, 1945 Mack EF Fire Truck
Circle of Safety: Y
Location: MD, Baltimore and Freeland
Contact:

Postby Carm » Sat Nov 19, 2005 5:48 pm

I tend to use the expletive while describing the engineers that designed the castellated nut and cotter pin and then designed the rest of the machine around them!


Return to “Off Topic”

Who is online

Users browsing this forum: No registered users and 7 guests