Saw Safety
Posted: Tue Mar 26, 2013 7:44 am
Well heres what BY was talking about. I was working on cutting some plywood for an instructor that is coming into Indy next month for fire class'es. I work in Logistic's for FDIC. I was almost done I moved the board because it was moving the saw horse's I had it lying on. Well I got 2 fingers with the saw underneath side of the plywood. I really thought I had enough room to put my hand to move board. It was a 20V DeWalt circuler saw.
Had to have 6 stitches in the middle finger just behind the nail & first joint on the bottom side, ring finger had to have 2 stitches on the tip end.
Bottom line if you are going to move lumber you are cutting let saw stop remove from area & move everything with both hands. This all happen on Sunday the 24 of March. Nice BD present to my self.
I know I do preach Safety but this one bit me good this time.
I'm still upset with myself.
SAFETY
Thanks
Jeff
Had to have 6 stitches in the middle finger just behind the nail & first joint on the bottom side, ring finger had to have 2 stitches on the tip end.
Bottom line if you are going to move lumber you are cutting let saw stop remove from area & move everything with both hands. This all happen on Sunday the 24 of March. Nice BD present to my self.
I know I do preach Safety but this one bit me good this time.
I'm still upset with myself.
SAFETY
Thanks
Jeff