This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Death at work
Forum rules
Safety is an important and often overlooked topic. Make safety a part of your everyday life and let others know how much you care by making their lives safer too. Let the next generation of tractor enthusiasts benefit from your experience, and maybe save a life or appendages.
Safety is an important and often overlooked topic. Make safety a part of your everyday life and let others know how much you care by making their lives safer too. Let the next generation of tractor enthusiasts benefit from your experience, and maybe save a life or appendages.
- fodman
- 10+ Years
- Posts: 63
- Joined: Sun Nov 16, 2008 5:52 pm
- Zip Code: 71743
- Tractors Owned: 1977 Cub s/n 251850 1947 A S/N 200229
- Circle of Safety: Y
- Location: gurdon arkansas
Death at work
a man got killed at the steel mill where i work yesterday, forklift operator got off machine to move some dunnage where he wanted to set load (about 30,000 lbs.). he turned his back to forklift and it rolled and pinned him between another stack of steel. he had left the engine running, trans in neutral but did not set his brake. how many times have we put a running tractor in neutral and just got off to do something. cubs have a brake lock and i have never used it but that is going to change . cubs are not heavy as far as tractors go but 1800 pounds sitting on your chest will kill you just as quick.
1977 Cub S/N 251850 1947 A S/N 200229
-
- 10+ Years
- Posts: 439
- Joined: Mon Jun 29, 2009 8:20 am
- Zip Code: 71836
- Tractors Owned: 49 cub buttercup
- Circle of Safety: Y
- Location: foreman ar.
Re: Death at work
bad news
-
- 10+ Years
- Posts: 174
- Joined: Wed Mar 10, 2010 6:47 pm
- Zip Code: 70706
- Circle of Safety: Y
Re: Death at work
Sorry to hear the bad news ,He and his family will be in our prayers
- chief
- 10+ Years
- Posts: 283
- Joined: Fri Apr 30, 2010 4:01 pm
- Zip Code: 71913
- Tractors Owned: Farmall Cub 1951
Ferguson TO-30 1953
Two Craftsman
104 Cub Cadet
1650 Cub cadet
LT-1018 cadet - Location: Hot Springs, Arkansas
Re: Death at work
Fodman we are all very sorry to hear about your lost of a co worker, it is very sad when anyone dies of something as simple as setting a break. But we all do things we shouldn't do some times, Thanks for posting this, It may make all of us to thing Twice. may God be with the family, The Chief
- randallc
- Cub Pro
- Posts: 1906
- Joined: Tue Jan 18, 2011 9:16 am
- Zip Code: 72940
- Tractors Owned: 1951 Farmall Cub, 152 disk plow, 2 gang disk, belly mower, sickle mower
1949 Farmall Cub, cultivator, moldboard plow, disk,front blade. Cub Cadet, LTX1045 Mower. Cub Cadet's 109, 125, 1000, and 1250
1961 cub c2 belly mower and full blade. 48 cub manual lift with cultivators.
1947 Cub - Circle of Safety: Y
- Location: Huntington, AR
Re: Death at work
Accidents are tough, cause everything is going just great then in a fraction of a second it can change usually resulting in bad stuff. Yes, a person should never leave a vehicle running and leave it, but we've all done it. Wishing the best for his family and in my prayer.
- Bigdog
- Team Cub Mentor
- Posts: 24144
- Joined: Sun Feb 02, 2003 12:50 pm
- Zip Code: 43113
- Circle of Safety: Y
- Location: OH, Circleville
- Contact:
Re: Death at work
Being involved in EMS and also plant safety and first response I have seen a lot of injuries and some deaths caused by "accidents". And they are indeed accidents. No one meant for anything to go wrong. But in most of those incidents people were doing something they had done before many times and never had a problem. In each case - "something" different happened this time. We do become complacent with our practices sometimes and it surely pays to stay on one's toes all the time when working around any type of equipment.
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
-
- 10+ Years
- Posts: 18
- Joined: Mon Jan 10, 2011 6:36 pm
- Zip Code: 05763
- Location: Vermont
Re: Death at work
I plowed with my cub today and got off a dozen times and only set the brake twice. Not smart but my big foot does not fit to step down or up with the brake set.
What I was taught early on about farm gear while very cool, it is a monster waiting to eat you if you get lazy, nonchalant or stupid.
Number one rule of thumb from Dad was never get between the tractor and something else without an escape plan and eyes wide open.
What I was taught early on about farm gear while very cool, it is a monster waiting to eat you if you get lazy, nonchalant or stupid.
Number one rule of thumb from Dad was never get between the tractor and something else without an escape plan and eyes wide open.
-
- 10+ Years
- Posts: 967
- Joined: Mon Aug 07, 2006 6:07 pm
- Location: benton ar.
Re: Death at work
Sorry to hear about your co-worker also, will keep all in our prayers, seems we all got a lot to do and forget what we are doing at the present.
Who is online
Users browsing this forum: No registered users and 2 guests