Finally got a snow plow for my 184 and started attaching the mount and lift. With educated guesses and glances at the manual, I was able to get everything attached except the lift bars that attach to the tractor's hydraulic rock shaft. The bars have one end that is slightly angled... does this angle up or down and does this side connect to the front rock shaft or the hydraulic rock shaft?
Thanks!
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Snow Blade Mounting Question
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
- Greg Armstrong
- 5+ Years
- Posts: 142
- Joined: Tue Mar 29, 2016 2:50 pm
- Zip Code: 43074
- Tractors Owned: 1980 Cub Lo-Boy 184
- Location: Sunbury, OH
-
- 5+ Years
- Posts: 72
- Joined: Mon May 12, 2014 1:28 pm
- Zip Code: 49546
- Tractors Owned: 1951 F-Cub, 1964 Cub Cadet 120, 1985 Kubota B7200D
Re: Snow Blade Mounting Question
I had the same issue with my 184 and after swapping them around decided it really didn't make any difference as long as they were mounted the same on each side.
Probably the most important part is to make sure the spacers or bushings are present for the 1/2" bolts so you can securely tighten the bolts without pinching the arms.
Probably the most important part is to make sure the spacers or bushings are present for the 1/2" bolts so you can securely tighten the bolts without pinching the arms.
- Greg Armstrong
- 5+ Years
- Posts: 142
- Joined: Tue Mar 29, 2016 2:50 pm
- Zip Code: 43074
- Tractors Owned: 1980 Cub Lo-Boy 184
- Location: Sunbury, OH
Re: Snow Blade Mounting Question
I'll play around with it. Thanks!
Return to “Lo-Boy Series - 154, 184, 185”
Who is online
Users browsing this forum: No registered users and 4 guests