PTO handle engagement problem

IH CUB Lo-Boy Series - 154, 184, 185 Forum -- Questions and answers to all of your Lo-Boy related issues.

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Posts: 17
Joined: Sun May 07, 2017 6:22 pm
Zip Code: 30558

Re: PTO handle engagement problem

Postby JohnnyJay » Sun Aug 13, 2017 7:39 am

Thanks for everyone's help, I got the pto clutch kit from Hamilton Bob and now it works Great! Really wasn't that hard of a job. Thanks again, John

10+ Years
10+ Years
Posts: 6387
Joined: Sat Jul 22, 2006 5:02 pm
Zip Code: 00000
Location: in northern usa

Re: PTO handle engagement problem

Postby BigBill » Wed Aug 23, 2017 1:42 pm

Great you fixed it, the pto clutch setup on these tractors the problems to fix it are over blown. There so easy to fix. I built machines with this type of clutch design..
I'm technically misunderstood at times i guess its been this way my whole life so why should it change now.

Posts: 1
Joined: Mon Sep 04, 2017 11:10 pm
Zip Code: 49093

Re: PTO handle engagement problem

Postby broadus51 » Mon Sep 04, 2017 11:30 pm

If your PTO clutch is slipping a little it may be heating up enough to work , but when disengaged it will still be working until it cools off. Do not touch it for a while as it will burn you. If this is happening you will have to add more shims to put more pressure on the plates. If not addressed it will wear out your plates

  • Similar Topics
    Last post

Return to “Lo-Boy Series - 154, 184, 185”

Who is online

Users browsing this forum: No registered users and 1 guest