outdoors4evr wrote:How do you adjust for the width of the tractor so that the wheel fits in the furrow?
Two clamps on the square tubing part of the three point mast would allow some lateral adjustment,
Bill
outdoors4evr wrote:How do you adjust for the width of the tractor so that the wheel fits in the furrow?
The hubs and rims from a standard Cub bolt up to a numbered Cub low-boy.outdoors4evr wrote:How do you adjust for the width of the tractor so that the wheel fits in the furrow?
BigBill wrote:I have a cub cadet 100 setup for just tilling with the creeper,
Not a viable option based on my experience. I own a 154, creeper gear, 60" belly mower. To cut tall fescue pasture grass it takes 2 or 3 passes, creeper engaged, each time lowering the deck. And some times the tractor struggles with the first cut, full height of the mower deck.snilloh43 wrote:is this a viable option to add to help with mowing? I have noticed that I have occasions, when the grass is tall or thick, that even 1st gear is too fast for the machine to cut.
Return to “Lo-Boy Series - 154, 184, 185”
Users browsing this forum: No registered users and 0 guests