This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
184 valve springs
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
184 valve springs
Hey guys, I'm looking for a valvespring kit for my 184 and it appears all kits say without rotocaps on exhaust springs, and the kit only contains the oem compatible springs 8 to be exact for the intakes.....it's obvious my intake vs exhaust springs are different, as my exhaust springs have the rotorcaps/rotators.......where can I find a compatible kit that'll have exhaust and intake springs to fit my needs??
-
- Team Cub
- Posts: 11862
- Joined: Tue May 25, 2004 8:02 pm
- Zip Code: 80501
- Tractors Owned: Cubs, MH Pony, Shaw, Allis G, 1934 Silver King, JD LA and LI, Gibson D, David Bradley Tri-Trac
- Circle of Safety: Y
- Location: CO, Longmont
Re: 184 valve springs
Messick's (IH Dealer) shows them with 2 different part #'s, so you should be able to get them from a dealer. What was confusing is that it appears that some of the springs were the same with or without rotocaps, and a second part # when rotocaps were present.
Bob
Bob
"We don't need to think more,
we need to think differently."
-Albert Einstein
we need to think differently."
-Albert Einstein
-
- 10+ Years
Re: 184 valve springs
Bob McCarty wrote:Messick's (IH Dealer) shows them with 2 different part #'s, so you should be able to get them from a dealer. What was confusing is that it appears that some of the springs were the same with or without rotocaps, and a second part # when rotocaps were present.
Bob
I have rotocaps on mine and you can visably tell the valve springs are different on intake vs exhaust.
-
- Similar Topics
- Replies
- Views
- Last post
-
-
Clutch pressure plate springs
by Duner » Sun Jul 25, 2021 8:43 am » in Lo-Boy Series - 154, 184, 185 - 6
- 676
-
by BigBill
Tue Jul 27, 2021 11:39 pm
-
-
-
154 Three point Hydraulic valve
by Tractor47 » Sun Dec 12, 2021 5:04 am » in Lo-Boy Series - 154, 184, 185 - 2
- 457
-
by outdoors4evr
Wed Dec 15, 2021 8:03 am
-
Return to “Lo-Boy Series - 154, 184, 185”
Who is online
Users browsing this forum: No registered users and 0 guests