This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
running poorly
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 7388
- Joined: Sat Jul 22, 2006 5:02 pm
- Zip Code: 00000
- Location: in northern usa
running poorly
My 154 with the electrical problem was running very poorly. My 9HP fcub had more power. Every time I tried to get the pto engaged with the 3260 mower I'd have to jog it to spin it then engage it. After my engineer son took out the ohm meter and found 1.3 volts at the ground cable at the frame seat connection. He ran a cable to the tranny housing now it has 13+ volts when it's running. I have plenty of power now too I can engage the PTO one shot. My point is no power ohm out your ground cable.
I'm technically misunderstood at times i guess its been this way my whole life so why should it change now.
Return to “Lo-Boy Series - 154, 184, 185”
Who is online
Users browsing this forum: No registered users and 9 guests