Last year I purchased a replacement New starter/generator on eBay.
NOT PURCHASED FROM HAMILTONBOBSCUBS. After all my son's work the last problem is this brand new starter starts fine but after it gets hot the starter part of it didn't turn over the engine. The battery is getting 13+ volts when it's running. The new starter is banging away when it clicks so the voltage is there. If we jump it when it's hot it will start. I guess my son's will fix this next.
I think the new S/G is from China.
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Replacement bad new S/G on ebay
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 7388
- Joined: Sat Jul 22, 2006 5:02 pm
- Zip Code: 00000
- Location: in northern usa
Replacement bad new S/G on ebay
I'm technically misunderstood at times i guess its been this way my whole life so why should it change now.
-
- Team Cub Mentor
- Posts: 20377
- Joined: Fri Jul 02, 2004 9:52 pm
- Zip Code: 65051
- Circle of Safety: Y
- Location: Mo. Linn
-
- 10+ Years
- Posts: 7388
- Joined: Sat Jul 22, 2006 5:02 pm
- Zip Code: 00000
- Location: in northern usa
Re: Replacement bad new S/G on ebay
When it's cold the starter works. My son fixed the ground wire we have 13+ volts at the tranny cover. The engine toys over when it's cold. Nothing happens at the starter when it's hot only the loud solenoid click.
This new solenood really bangs in so it has plenty of voltage. My son installed a new wire harness so I'm sure all the connections are clean. I have a used starter to try next.
This new solenood really bangs in so it has plenty of voltage. My son installed a new wire harness so I'm sure all the connections are clean. I have a used starter to try next.
I'm technically misunderstood at times i guess its been this way my whole life so why should it change now.
-
- Team Cub Mentor
- Posts: 20377
- Joined: Fri Jul 02, 2004 9:52 pm
- Zip Code: 65051
- Circle of Safety: Y
- Location: Mo. Linn
Re: Replacement bad new S/G on ebay
My thought, rebuild or have rebuilt the original USA manufactured starter/generator. Quality of finished product will probably be much better than you can get from an unknown e-bay item.
I have an excuse. CRS.
-
- 10+ Years
- Posts: 7388
- Joined: Sat Jul 22, 2006 5:02 pm
- Zip Code: 00000
- Location: in northern usa
Re: Replacement bad new S/G on ebay
I have the old one and I have new brushes and the bearings here in-house. I just got lazy since I been sick. I purchased the new s/g about a year and a half ago. Then I purchased most of the electrical stuff brand new so my problems would be over. But now it's running.
I'm technically misunderstood at times i guess its been this way my whole life so why should it change now.
Return to “Lo-Boy Series - 154, 184, 185”
Who is online
Users browsing this forum: No registered users and 14 guests