This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy

NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.

upgrading into the 70's with a 184

IH CUB Lo-Boy Series - 154, 184, 185 Forum -- Questions and answers to all of your Lo-Boy related issues.
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Post Reply
outdoors4evr
10+ Years
10+ Years
Posts: 2791
Joined: Tue Jul 22, 2008 12:44 pm
Zip Code: 48370
Tractors Owned: 184
Location: Oxford, MI

Re: upgrading into the 70's with a 184

Postby outdoors4evr » Mon Jun 16, 2014 10:16 am

You can probably get $700-$800 for a complete 3-point in the northeast. Seller beware though, some sheet metal goes with the 3-point. You will need some sheet metal covers back from the buyer to make your 184 complete again.
184 w/ Creeper & 3-Point
IH 3160a Mower
IH Model 15 Tiller
IH-54 Blade
Top

SPONSOR AD

Sponsor

Sponsor
 
Top
Kirk-NJ
10+ Years
10+ Years
Posts: 718
Joined: Sat Jan 03, 2009 1:15 pm
Zip Code: 07838
Location: Great Meadows NJ

Re: upgrading into the 70's with a 184

Postby Kirk-NJ » Tue Jun 24, 2014 2:41 pm

outdoors4evr wrote:You can probably get $700-$800 for a complete 3-point in the northeast. Seller beware though, some sheet metal goes with the 3-point. You will need some sheet metal covers back from the buyer to make your 184 complete again.


What sheet metal that covers back? I know the middle section housing where the diverter is. Would the 154 sheet metal fit and would that be the same?
Top
outdoors4evr
10+ Years
10+ Years
Posts: 2791
Joined: Tue Jul 22, 2008 12:44 pm
Zip Code: 48370
Tractors Owned: 184
Location: Oxford, MI

Re: upgrading into the 70's with a 184

Postby outdoors4evr » Wed Jun 25, 2014 6:49 am

There is a sheet metal cover that wraps behind the PTO. Take a look at a few pictures on the site. The 184, 154 and 185 also use the same sheet metal covers on the rear of the tractor.
184 w/ Creeper & 3-Point
IH 3160a Mower
IH Model 15 Tiller
IH-54 Blade
Top
Post Reply

Return to “Lo-Boy Series - 154, 184, 185”

Who is online

Users browsing this forum: No registered users and 7 guests