Thu Mar 06, 2014 1:17 pm
Does anyone know what parts are different for a woods mid-mount regarding a Farmall and a 154? Or are these totally different animals?
Thu Mar 06, 2014 3:42 pm
Actually, all of the deck parts (spindles, bearings, blades, etc.,) are the same. The mounting hardware is different, but that's about it.
Thu Mar 06, 2014 6:53 pm
All mounting brackets and the belt guides are all different---decks are same! I just changed one from standard cub to 185 and you gotta use all the 154/185 stuff to get to work---also have to have rear wheel spacers to move wheels out about 1" on each side.---you can make these your self if you have access to big drill press and can get the big center hole cut, (I used torch for that) thanks; sonny
Wed Jan 21, 2015 5:05 pm
Do you have the dimensions or a drawing of the spacers? I would like to fabricate a set.
Thu Jan 29, 2015 7:26 pm
they look like big thick washers and can be cut from 1" thick steel then drill the right size bolt holes,--don't get fancy because nobody is going to see them back in there! thanks; sonny
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.