This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy

NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.

crankshaft pulley puller for 154/184/185?

IH CUB Lo-Boy Series - 154, 184, 185 Forum -- Questions and answers to all of your Lo-Boy related issues.
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Post Reply
RustyKnuckles
10+ Years
10+ Years
Posts: 127
Joined: Tue Sep 17, 2013 7:22 pm
Zip Code: 01073

crankshaft pulley puller for 154/184/185?

Postby RustyKnuckles » Mon Mar 03, 2014 9:18 pm

What do people use to pull the large-diameter pulley found on these tractors? The fixtures people make up for Cubs are of course too small.
Jay Smith

1953 Cub, acquired fall 2013. Runs much better thanks to tuneup by Art Chester!
Next, replacement of old parts (radiator, seals, etc.) + painting.

Plus 3 JD garden tractors (425,318,140)
& two Buick Roadmaster station wagons
Top

SPONSOR AD

Sponsor

Sponsor
 
Top
User avatar
RaymondDurban
Cub Pro
Cub Pro
Posts: 4435
Joined: Wed Dec 26, 2007 7:45 pm
Zip Code: 32536
Circle of Safety: Y
Location: FL, Crestview

Re: crankshaft pulley puller for 154/184/185?

Postby RaymondDurban » Mon Mar 03, 2014 9:27 pm

Remove the bolt and washer from the end of the crankshaft and it'll pull right off. I've removed a couple, no tools required.
Top
RustyKnuckles
10+ Years
10+ Years
Posts: 127
Joined: Tue Sep 17, 2013 7:22 pm
Zip Code: 01073

Re: crankshaft pulley puller for 154/184/185?

Postby RustyKnuckles » Tue Mar 04, 2014 12:57 am

You mean, this pulley is not an interference fit, as it is with the Cubs?
Jay Smith

1953 Cub, acquired fall 2013. Runs much better thanks to tuneup by Art Chester!
Next, replacement of old parts (radiator, seals, etc.) + painting.

Plus 3 JD garden tractors (425,318,140)
& two Buick Roadmaster station wagons
Top
User avatar
gitractorman
10+ Years
10+ Years
Posts: 2678
Joined: Mon Oct 24, 2005 11:35 am
Zip Code: 14072
eBay ID: toysforjake
Tractors Owned: Lots of Cub Cadets!
1951 Farmall Cub
1977 IH Cub
1966 IH Cub
1965 IH Lo Boy
1964 IH Lo Boy
1949 Farmall Cub
Several IH 154 Lo Boys
1979 IH 184 Lo Boy
Simplicity 4416 Sovereign
Simplicity Conquest
Simplicity Legacy 4x4 Diesel
Mitsubishi MT180D 4x4 Diesel
Circle of Safety: Y
Location: Grand Island, NY

Re: crankshaft pulley puller for 154/184/185?

Postby gitractorman » Tue Mar 04, 2014 9:32 am

No, there's a key in it, so like Raymond said, just pull the bolt and the pulley will come of pretty easy. I've had to replace a few of those keys.
Cub Cadets 682, 1811, 1864, Simplicity Legacy XL 4x4 Diesel with FEL, 60" mower, 50" Tiller
Top
User avatar
Andrew Z
10+ Years
10+ Years
Posts: 205
Joined: Wed Jul 11, 2007 8:37 am
Zip Code: 06234
Location: CT. Brooklyn

Re: crankshaft pulley puller for 154/184/185?

Postby Andrew Z » Tue Mar 04, 2014 12:14 pm

I two / three jaw puller can be used if its stuck on there. However they are not like the early cubs at all in the degree of difficulty to remove.

Andrew
49 Cub, and many other Farmalls and one Orange critter :)

This is Farmall Country!!
Top
outdoors4evr
10+ Years
10+ Years
Posts: 2788
Joined: Tue Jul 22, 2008 12:44 pm
Zip Code: 48370
Tractors Owned: 184
Location: Oxford, MI

Re: crankshaft pulley puller for 154/184/185?

Postby outdoors4evr » Wed Mar 05, 2014 8:46 am

When you pull it off, inspect the key and the pulley hub area for wear. 1/2 my key was worn off.
184 w/ Creeper & 3-Point
IH 3160a Mower
IH Model 15 Tiller
IH-54 Blade
Top
Post Reply

Return to “Lo-Boy Series - 154, 184, 185”

Who is online

Users browsing this forum: No registered users and 6 guests