This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
crankshaft pulley puller for 154/184/185?
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 127
- Joined: Tue Sep 17, 2013 7:22 pm
- Zip Code: 01073
crankshaft pulley puller for 154/184/185?
What do people use to pull the large-diameter pulley found on these tractors? The fixtures people make up for Cubs are of course too small.
Jay Smith
1953 Cub, acquired fall 2013. Runs much better thanks to tuneup by Art Chester!
Next, replacement of old parts (radiator, seals, etc.) + painting.
Plus 3 JD garden tractors (425,318,140)
& two Buick Roadmaster station wagons
1953 Cub, acquired fall 2013. Runs much better thanks to tuneup by Art Chester!
Next, replacement of old parts (radiator, seals, etc.) + painting.
Plus 3 JD garden tractors (425,318,140)
& two Buick Roadmaster station wagons
- RaymondDurban
- Cub Pro
- Posts: 4435
- Joined: Wed Dec 26, 2007 7:45 pm
- Zip Code: 32536
- Circle of Safety: Y
- Location: FL, Crestview
Re: crankshaft pulley puller for 154/184/185?
Remove the bolt and washer from the end of the crankshaft and it'll pull right off. I've removed a couple, no tools required.
Screwstick #3934
FCub - LoBoy - Numbered Series - Power Unit Databases
FCub - LoBoy - Numbered Series - Power Unit Databases
-
- 10+ Years
- Posts: 127
- Joined: Tue Sep 17, 2013 7:22 pm
- Zip Code: 01073
Re: crankshaft pulley puller for 154/184/185?
You mean, this pulley is not an interference fit, as it is with the Cubs?
Jay Smith
1953 Cub, acquired fall 2013. Runs much better thanks to tuneup by Art Chester!
Next, replacement of old parts (radiator, seals, etc.) + painting.
Plus 3 JD garden tractors (425,318,140)
& two Buick Roadmaster station wagons
1953 Cub, acquired fall 2013. Runs much better thanks to tuneup by Art Chester!
Next, replacement of old parts (radiator, seals, etc.) + painting.
Plus 3 JD garden tractors (425,318,140)
& two Buick Roadmaster station wagons
- gitractorman
- 10+ Years
- Posts: 2680
- Joined: Mon Oct 24, 2005 11:35 am
- Zip Code: 14072
- eBay ID: toysforjake
- Tractors Owned: Lots of Cub Cadets!
1951 Farmall Cub
1977 IH Cub
1966 IH Cub
1965 IH Lo Boy
1964 IH Lo Boy
1949 Farmall Cub
Several IH 154 Lo Boys
1979 IH 184 Lo Boy
Simplicity 4416 Sovereign
Simplicity Conquest
Simplicity Legacy 4x4 Diesel
Mitsubishi MT180D 4x4 Diesel - Circle of Safety: Y
- Location: Grand Island, NY
Re: crankshaft pulley puller for 154/184/185?
No, there's a key in it, so like Raymond said, just pull the bolt and the pulley will come of pretty easy. I've had to replace a few of those keys.
Cub Cadets 682, 1811, 1864, Simplicity Legacy XL 4x4 Diesel with FEL, 60" mower, 50" Tiller
- Andrew Z
- 10+ Years
- Posts: 205
- Joined: Wed Jul 11, 2007 8:37 am
- Zip Code: 06234
- Location: CT. Brooklyn
Re: crankshaft pulley puller for 154/184/185?
I two / three jaw puller can be used if its stuck on there. However they are not like the early cubs at all in the degree of difficulty to remove.
Andrew
Andrew
49 Cub, and many other Farmalls and one Orange critter
This is Farmall Country!!
This is Farmall Country!!
-
- 10+ Years
- Posts: 2791
- Joined: Tue Jul 22, 2008 12:44 pm
- Zip Code: 48370
- Tractors Owned: 184
- Location: Oxford, MI
Re: crankshaft pulley puller for 154/184/185?
When you pull it off, inspect the key and the pulley hub area for wear. 1/2 my key was worn off.
184 w/ Creeper & 3-Point
IH 3160a Mower
IH Model 15 Tiller
IH-54 Blade
IH 3160a Mower
IH Model 15 Tiller
IH-54 Blade
Return to “Lo-Boy Series - 154, 184, 185”
Who is online
Users browsing this forum: No registered users and 14 guests