Wed Jan 29, 2014 12:19 pm
Still have not made any plow brackets for the 154. The old shovel and back still work.
You do not have the required permissions to view the files attached to this post.
Wed Jan 29, 2014 1:25 pm
Pete, that's a nice looking 154. You're lucky it has a good front fiberglass piece, ever priced one out?
Wed Jan 29, 2014 4:16 pm
Bummer! A working Cub with blade is the difference between playing in the snow and work. Don't over do it!
Mon Feb 03, 2014 2:18 am
I made my own plow brackets for my 80's jeep cj 5 I started on Christmas eve on a Friday and by Wednesday I had a working plow set up. As I opened up the shop door to park it outside it started snowing. This was in the late 90's. You jogged my memory. I had the plow setup off a 55 Willy' s. It fit the 80 cj with new brackets.
I took the same plow setup and made brackets to fit my 154. I had the frame brackets and lift rods, I was missing the plow and plow frame brackets. Looking at the lower bracket n the tractor that holds the plow frame I made one. Then I cut the jeep plow height wise and width wise to lighten it up. I found out the first snowfall that wheel weights were needed.
Fri Feb 14, 2014 11:30 am
Do you have a way to put weight on the back and chains? When I first got my 154 I did not have any weight on the back and it did not plow as I had hoped it would even with chains. This year I have a scraper blade on the back and use it mainly for weight when I use the front blade. Yesterday we had 14 inches and I plowed the driveway to the dirt and moved some big snow piles with my 154.
Fri Feb 14, 2014 1:06 pm
Do you have a 3 point for it?
Sat Feb 15, 2014 8:41 am
Id like to set it up with a three point and some chains. All in good time. I have noticed that these numbered tractors are very light and need something more for beter traction.
Fri May 30, 2014 1:50 am
I found out that dual wheel weights work better on the rear.
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.