Farmall Cub

Does anyone have a few good snow plow pictures of how it is mounted to lowboy? I have a 1969 so I'm looking for one how it mounts. I have seen the pictures in the books and a picture of how one is mounted on an older one but nothing for my type.

Here's a link to photos from TM Tractor: http://www.tm-tractor.com/gim/bladelb_001.htm
The hook up is the same as with a regular Cub, it's just that the brackets are different lengths, etc.

Bob

Edit: I read Loboy but didn't look at the heading to see it was for a numbered Cub. Those pictures won't help much.

Here is the manual for the blade. http://www.farmallcub.com/[ Sorry, direct links to manual section is not allowed. ]/files/N ... 0blade.pdf

I have 1 on a 154,---and it only will raise 1 inch off the floor---so dont expect a great bulldozer IF you get it mounted!---the brackets are a nightmare hanging under there!----wanted to take mine off and get rid of it but its going to take LOTS of time to get it all unhooked and dragged out!
I can probably take some pics of it if you need them to show how mine is installed! thanks; sonny

I have a few -







I'm happy to answer any questions you might have -

K

Hmm. Nice looking plow. If a fella had some fabricating skills it looks like most any 54 blade could be modified to work on a numbered Cub. Looks like it would have good articulation too.