184 new to me

IH CUB LoBoy Series - 154, 184, 185 Forum -- Questions and answers to all of your LoBoy related issues.

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.

184 new to me

Postby daled » Thu May 10, 2012 1:28 pm

i now have a cub 184 with a broken crank.
i can't seem to find one.
will an early crank work, or be made to work in this motor.

from what i can tell internally it looks identical to the c60 in my farmall cub.
exterior pulley and flywheel look different.
daled
 
Posts: 4
Joined: Thu May 10, 2012 1:04 pm
Zip Code: 64836

Re: 184 new to me

Postby Jim Becker » Thu May 10, 2012 2:52 pm

Yes, the crankshaft will interchange between a Farmall and a 184.
User avatar
Jim Becker
Team Cub
Team Cub
 
Posts: 11972
Joined: Sun Feb 02, 2003 3:14 pm
Location: MN
Zip Code: 55319
Circle of Safety Award
Circle of Safety: Y

Re: 184 new to me

Postby daled » Thu May 10, 2012 3:51 pm

good news..
the main shaft running from the clutch to the tranny could be improoved upon.
im haveing a time finding this part also..
any source recommendations ?
daled
 
Posts: 4
Joined: Thu May 10, 2012 1:04 pm
Zip Code: 64836

Re: 184 new to me

Postby Bob McCarty » Thu May 10, 2012 4:21 pm

Check with HamiltonBobsCubs, sponsor with link at the bottom of the page. If it's not listed in their catalog, I'd suggest giving them a call.

Bob
"We don't need to think more,
we need to think differently."
-Albert Einstein
Bob McCarty
Team Cub Mentor
Team Cub Mentor
 
Posts: 5689
Joined: Tue May 25, 2004 8:02 pm
Location: CO, Longmont
Zip Code: 80501
Circle of Safety Award
Circle of Safety: Y

Re: 184 new to me

Postby tnestell » Thu May 10, 2012 7:23 pm

Jim Becker wrote:Yes, the crankshaft will interchange between a Farmall and a 184.

Did the 184 have a forged crank like the power units?
User avatar
tnestell
10+ Years
10+ Years
 
Posts: 336
Joined: Mon Feb 03, 2003 2:01 am
Location: Mi, Saginaw
Zip Code: 48609
Circle of Safety Award
Circle of Safety: Y

Re: 184 new to me

Postby outdoors4evr » Fri May 11, 2012 7:38 am

I just finished the same project on my 184 last fall. Crank broke just behind the #4 journal.
Might want to check out what I found as a root cause.
http://www.farmallcub.com/phpBB2/viewtopic.php?f=31&t=65141&hilit=crankshaft

HamiltonBobsCubs has the best prices (and service) on crankshafts for the 154/184. I would purchase a crank from a 154 or 184 rather than the farmall cub. They might be the same, but why gamble if cranks are available.

If the driveshaft splines are worn then you will also need to replace the clutch. Driveshafts are available from a dealer, but only for a 184 without a creeper. If you have a creeper then you have to buy the longer driveshaft from the dealer and then have it shortened and turned down to fit. Take your original driveshaft to the machine shop so they can use it as a template.
Buy your clutch plate from HamiltonBobsCubs because the price at the dealer just increased significantly.
184 w/ Creeper & 3-Point
IH Model 15 Tiller
outdoors4evr
5+ Years
5+ Years
 
Posts: 730
Joined: Tue Jul 22, 2008 12:44 pm
Location: Davison, MI
Zip Code: 48423
Tractors Owned: 184

Re: 184 new to me

Postby daled » Mon May 21, 2012 1:04 pm

odd,
the crank in my 184 also broke after #4 rod just prior to the rear main..
as my other cub has never failed, im wondering if there are imposed stresses when the cast torque tube was ditched in favor of the sheet steel consturction ?

i have no idea what the 184 was been thru in its life, but i have worked the snot out of my earier cub...
daled
 
Posts: 4
Joined: Thu May 10, 2012 1:04 pm
Zip Code: 64836


Return to LoBoy Series - 154, 184, 185

Who is online

Users browsing this forum: No registered users and 2 guests