Need more help--New guy here with 154 troubles

[ozark]

Got the new shifter fork in and cannot figure out how to get it on. I can get it into the case, underneath the shifting rail, but I can't get it over the rail. Any advice greatly appreciated. I do not want to have to split the tractor.

[Jim Becker]

Look at this thread. I think it explains how to do it.
http://www.farmallcub.com/phpBB2/viewtopic.php?f=1&t=59477

[ozark]

I can easily slide the shifting rail back and forth, but it comes back and hits something solid. I can't move it any further. Any ideas?

[ozark]

Got it all figured out and put back together. Gonna eat some lunch and get it all buttoned up and try it out. Hope everything works like it should.

[ozark]

Thanks to all of your help i got it all put together and even mowed with it for about fifteen min. The only thing is at times when i try to put it in reverse it may not go until i let the clutch out a little then try again. I adjusted the clutch to where it doesnt grind going into gear now too.
I also tightened up the belt that drives the mower and it seems to mow the thicker grass a little better now.
A big thanks goes out to all that helped me here on this forum.