This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
pullys out of line
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 140
- Joined: Mon Apr 21, 2008 8:02 pm
pullys out of line
I noticed that the drive sheave and the pto sheave are out of line with each other. I don't know how it happened but it is hard on the bearings. Everything looks like it is where it is supposed to be. The drive shaft is a cut down long shaft to accomodate a creeper. any Ideas.
-
- 10+ Years
- Posts: 2791
- Joined: Tue Jul 22, 2008 12:44 pm
- Zip Code: 48370
- Tractors Owned: 184
- Location: Oxford, MI
Re: pullys out of line
Which Tractor do you have? A 154 or a 184?
184 w/ Creeper & 3-Point
IH 3160a Mower
IH Model 15 Tiller
IH-54 Blade
IH 3160a Mower
IH Model 15 Tiller
IH-54 Blade
-
- 10+ Years
- Posts: 7388
- Joined: Sat Jul 22, 2006 5:02 pm
- Zip Code: 00000
- Location: in northern usa
Re: pullys out of line
Are the PTO belts too tight in the adjustment??
I've seen the PTO pulley on the PTO shaft actually wobble itself to self destruct its bore on the shaft from not being adjusted correctly. (too tight) I try to adjust everything within spec in the manual.
I've seen the PTO pulley on the PTO shaft actually wobble itself to self destruct its bore on the shaft from not being adjusted correctly. (too tight) I try to adjust everything within spec in the manual.
I'm technically misunderstood at times i guess its been this way my whole life so why should it change now.
Return to “Lo-Boy Series - 154, 184, 185”
Who is online
Users browsing this forum: No registered users and 14 guests