Are there any tips (or a Cliff Notes version) for adjusting the IPTO on a Cub 154. Mine is too tight and the pto continues to run after the pto is supposed to be disengaged. I do have the service manual but from experience I know that service manuals do not tell everything on working on 40+ year old tractors (mine is a 1969 Cub 154).
Thanks
Bookman
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
IPTO Adjustment on Cub 154
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- Team Cub Mentor
- Posts: 5653
- Joined: Thu Aug 03, 2006 6:20 am
- Zip Code: 43358
- Tractors Owned: 48 Cub Diesel (Cubota)
53 Cockshutt 20 restored (Shooter)
52 Cockshutt 20 unrestored
47 Leader "B" (Herckie)
49 Leader "D" (Princess)
49 Leader "D" very rough
48 Leader "D" unrestored
Kubota B6200E
Kubota B6200HST
Kubota B8200HST-D - Circle of Safety: Y
- Location: OH West Mansfield
Re: IPTO Adjustment on Cub 154
In this case, the manual will cover you pretty well. You'll need to adjust the clutch plate clearance. Be aware, though, you may have warped clutch plates causing the problem.
-
- 10+ Years
- Posts: 1172
- Joined: Tue Oct 19, 2004 7:10 am
- Zip Code: 29130
- Tractors Owned: fcub(5)
tricycle cub
154 (4)
Earthmaster (2)
JD 40T, JD 420 crawler-loader, JD MT
JD Unstyled A, Styled A, Unstyled AR
JD H
Centaur Tractor
AC Model C, G
Cub Cadets (9)
Gibson D
Red-E - Circle of Safety: Y
- Location: SC, Ridgeway
Re: IPTO Adjustment on Cub 154
What year 154? The PTO clutches were slightly different. If it is an early clutch style, it will have a threaded adjustment nut on the front end of the clutch shaft, this may have come loose and over tightened the clutch. Not much will cause the clutch to not release other than lots of rust, jamming of the clutch pack, loose adjustment nut, bad cam bearings. You just need to remove from the tractor, 30 minute job, and look at the clutch. The link below should help, the manual is not all that great for the PTO clutch operation and troubleshooting.
http://www.farmallcub.com/phpBB2/viewtopic.php?f=31&t=60650
http://www.farmallcub.com/phpBB2/viewtopic.php?f=31&t=60650
-
- 10+ Years
- Posts: 219
- Joined: Sun Aug 10, 2008 3:15 pm
Re: IPTO Adjustment on Cub 154
Thanks, It is a 1969 model serial # 10325.
Bookman
Bookman
-
- Similar Topics
- Replies
- Views
- Last post
-
-
154 Throttle adjustment?
by garmarnarnar » Sat Jul 08, 2023 2:51 pm » in Lo-Boy Series - 154, 184, 185 - 1
- 846
-
by Brynki
Sat Aug 05, 2023 3:00 pm
-
Return to “Lo-Boy Series - 154, 184, 185”
Who is online
Users browsing this forum: No registered users and 0 guests