This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
154 c-60
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
JGtools
- 10+ Years
- Posts: 957
- Joined: Tue Dec 18, 2007 8:18 pm
- Zip Code: 55325
- Tractors Owned: 1958 ih 340 utility
1950 farmall cub
1948 ford 8n
kubota 3240
IH 154 loboy - Location: Dassel, Minnesota
154 c-60
I installed the governor oil seal today, manual says to seat it 23/32 inside, I installed the governor and I just wanted to double check with you guys before I continue assembly of engine, if this looks right. I was thinking the governor gear would ride deeper into the oil seal. .. If you can see by the picture click on picture to enlarge, you should get a view. i installed the new oil seal, the same as the old seal was in, so that should be ... let me know what you think. I turned the engine over by hand a few times, and the oil seal seems to be ok, rides on the governor gear nice and smooth. Thanks for your time and help, Jim
- Attachments
-
Return to “Lo-Boy Series - 154, 184, 185”
Who is online
Users browsing this forum: No registered users and 5 guests
