This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
154 independent pto clutch picture
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 957
- Joined: Tue Dec 18, 2007 8:18 pm
- Zip Code: 55325
- Tractors Owned: 1958 ih 340 utility
1950 farmall cub
1948 ford 8n
kubota 3240
IH 154 loboy - Location: Dassel, Minnesota
154 independent pto clutch picture
hello, what would cause the clutch friction disks to wear like what you see in the photo? any good options? thanks,Jim
-
- 10+ Years
- Posts: 4119
- Joined: Thu Nov 09, 2006 11:26 pm
- Zip Code: 61722
Re: 154 independent pto clutch picture
Is your pilot bearing good and tight?----something is loose there, or not lined up straight!---also is the clutch pack itself got the proper tension on the disks?---You have worn outer bell and the only replacement would be from a junkyard, IF you can find a good one!!---also do you have shims under your pto bracket? --this will affect the pto alignment too!
Last cure would be to weld up the gouges and grind them square again! (a temporary band aid fix,--but may be the cheapest other than a lot of time spent taking it all apart to weld/grind, and re-assemble ) thanks; sonny
Last cure would be to weld up the gouges and grind them square again! (a temporary band aid fix,--but may be the cheapest other than a lot of time spent taking it all apart to weld/grind, and re-assemble ) thanks; sonny
-
- 10+ Years
- Posts: 7388
- Joined: Sat Jul 22, 2006 5:02 pm
- Zip Code: 00000
- Location: in northern usa
Re: 154 independent pto clutch picture
The wear marks in the PTO drum is from hitting stuff with the mower/attachments. The wear is from the shock as the clutch plates give/slip. Somethings gotta give or it will snap.
The uneven wear and the slots not being lined up with the clutch plate discs
is from the shaft movement. Are the drum set screws tight on the shaft? I have seen the drum move on the drive
shaft from not being tight enough.
The uneven wear and the slots not being lined up with the clutch plate discs
is from the shaft movement. Are the drum set screws tight on the shaft? I have seen the drum move on the drive
shaft from not being tight enough.
I'm technically misunderstood at times i guess its been this way my whole life so why should it change now.
-
- 10+ Years
- Posts: 957
- Joined: Tue Dec 18, 2007 8:18 pm
- Zip Code: 55325
- Tractors Owned: 1958 ih 340 utility
1950 farmall cub
1948 ford 8n
kubota 3240
IH 154 loboy - Location: Dassel, Minnesota
Re: 154 independent pto clutch picture
Bill, I will check the drum set screws, I will make sure they are tight if they are loose. Should I try and weld the grooves in the drum, and grind flat? or try use as is. can I get at the set screw without removing anything, from the picture I have,it looks like it is located under the drum area, thanks for helping,Jim
Last edited by JGtools on Mon Jan 25, 2010 12:33 am, edited 1 time in total.
-
- 10+ Years
- Posts: 957
- Joined: Tue Dec 18, 2007 8:18 pm
- Zip Code: 55325
- Tractors Owned: 1958 ih 340 utility
1950 farmall cub
1948 ford 8n
kubota 3240
IH 154 loboy - Location: Dassel, Minnesota
Re: 154 independent pto clutch picture
sure is a ugly part red. part yellow 154. it will look better when i get to painting her
-
- Similar Topics
- Replies
- Views
- Last post
-
- 5
- 415
-
by nat
Sat Mar 19, 2022 1:59 pm
-
- 1
- 795
-
by FSJNut
Sun Jul 02, 2023 8:55 pm
-
- 3
- 214
-
by SONNY
Sun Apr 23, 2023 6:34 pm
-
-
184 PTO Clutch Issues Attachment(s)
by ibdilbert » Tue Jun 27, 2023 9:29 pm » in Lo-Boy Series - 154, 184, 185 - 2
- 800
-
by Gary Dotson
Sun Jul 02, 2023 7:27 am
-
-
- 7
- 1030
-
by Gary Dotson
Sat Aug 05, 2023 7:00 am
Return to “Lo-Boy Series - 154, 184, 185”
Who is online
Users browsing this forum: No registered users and 1 guest