I have head and block at motor shop, The guy is going to do a valve job, resurface the head, clean everything up . I did discover, that the front crank pulley had been jb welded where the crank shaft key seats, and the pulley had a jb weld inside shaft hub in the key slot, was wondering what would cause this , to have this kind of repair?? did the crank shaft key break,and caused pulley to turn on shaft?
I noted that the main crank bearings are marked with numbers,and STD. STD= STANDARD? , when I replace bearings, do I need the numbers off old bearings, and is there a good source for c-60 engine bearings ThanksJim
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
c-60 questions
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 957
- Joined: Tue Dec 18, 2007 8:18 pm
- Zip Code: 55325
- Tractors Owned: 1958 ih 340 utility
1950 farmall cub
1948 ford 8n
kubota 3240
IH 154 loboy - Location: Dassel, Minnesota
-
- 10+ Years
Re: c-60 questions
STD is standard, use the p/n off the rods when you order bearings. Time for a new pulley JB weld won't hold up in that application.
-
- 10+ Years
- Posts: 957
- Joined: Tue Dec 18, 2007 8:18 pm
- Zip Code: 55325
- Tractors Owned: 1958 ih 340 utility
1950 farmall cub
1948 ford 8n
kubota 3240
IH 154 loboy - Location: Dassel, Minnesota
Re: c-60 questions
I was looking on ebay, I should find one soon Im sure. Thanks,Jim
-
- Similar Topics
- Replies
- Views
- Last post
-
- 10
- 803
-
by SONNY
Fri Sep 17, 2021 10:20 am
-
-
New user here, Questions about a IH 184.
by Tenn_Bootlegger » Mon Aug 30, 2021 9:36 pm » in Lo-Boy Series - 154, 184, 185 - 4
- 541
-
by outdoors4evr
Tue Aug 31, 2021 11:23 am
-
-
-
Lo-Boy 154 PTO - Newbie questions
by PainintheNEK » Sun Jun 19, 2022 11:46 am » in Lo-Boy Series - 154, 184, 185 - 3
- 273
-
by BullDAWG
Wed Jun 22, 2022 1:14 am
-
-
-
New user here, Questions about a IH 184. Attachment(s)
by Metricquartz » Fri Aug 06, 2021 6:57 am » in Lo-Boy Series - 154, 184, 185 - 20
- 1286
-
by SONNY
Sat Aug 21, 2021 9:40 am
-
-
-
Snow plow Questions.
by Sirlandslide88 » Wed May 17, 2023 9:51 am » in Lo-Boy Series - 154, 184, 185 - 4
- 932
-
by Sirlandslide88
Thu May 18, 2023 8:40 pm
-
Return to “Lo-Boy Series - 154, 184, 185”
Who is online
Users browsing this forum: No registered users and 0 guests