This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy

NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.

154 loboy engine

IH CUB Lo-Boy Series - 154, 184, 185 Forum -- Questions and answers to all of your Lo-Boy related issues.
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Post Reply
JGtools
10+ Years
10+ Years
Posts: 957
Joined: Tue Dec 18, 2007 8:18 pm
Zip Code: 55325
Tractors Owned: 1958 ih 340 utility
1950 farmall cub
1948 ford 8n
kubota 3240
IH 154 loboy
Location: Dassel, Minnesota

154 loboy engine

Postby JGtools » Thu Dec 17, 2009 8:52 pm

I have removed the engine from the 154 loboy, and have it hanging from over head hoist, before I attatch it to engine stand, I was wondering about removing the flywheel first, as I will be replacing rear crank seal, and probably a complete overhaul, will know more once I get inside the engine. There are 4 bolts holding flywheel on, do I remove the 4 bolts, and what kind of puller will I need. This will be my first time working on a engine of this kind. thanks,Jim
Attachments
cub lowboy (Small).JPG
Top

SPONSOR AD

Sponsor

Sponsor
 
Top
JGtools
10+ Years
10+ Years
Posts: 957
Joined: Tue Dec 18, 2007 8:18 pm
Zip Code: 55325
Tractors Owned: 1958 ih 340 utility
1950 farmall cub
1948 ford 8n
kubota 3240
IH 154 loboy
Location: Dassel, Minnesota

Re: 154 loboy engine

Postby JGtools » Thu Dec 17, 2009 8:55 pm

it is a 154 ,painted and made to look like a 185 by PO. here is the picture of engine out.
Attachments
154 eng (Small).JPG
Top
HAMILTONBOB
10+ Years
10+ Years
Posts: 75
Joined: Tue Jun 26, 2007 6:08 am

Re: 154 loboy engine

Postby HAMILTONBOB » Sat Dec 19, 2009 8:54 am

Jim
Remove the 4 bolts, and you will not need a puller. Tap gengly with a hammer while pulling outward.
Good luck with the overhaul!
Hamiltonbobscubs
Top
JGtools
10+ Years
10+ Years
Posts: 957
Joined: Tue Dec 18, 2007 8:18 pm
Zip Code: 55325
Tractors Owned: 1958 ih 340 utility
1950 farmall cub
1948 ford 8n
kubota 3240
IH 154 loboy
Location: Dassel, Minnesota

Re: 154 loboy engine

Postby JGtools » Sat Dec 19, 2009 10:49 am

thanks, it removed with ease.
Top
Post Reply

Return to “Lo-Boy Series - 154, 184, 185”

Who is online

Users browsing this forum: No registered users and 18 guests