This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
154 loboy engine
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 957
- Joined: Tue Dec 18, 2007 8:18 pm
- Zip Code: 55325
- Tractors Owned: 1958 ih 340 utility
1950 farmall cub
1948 ford 8n
kubota 3240
IH 154 loboy - Location: Dassel, Minnesota
154 loboy engine
I have removed the engine from the 154 loboy, and have it hanging from over head hoist, before I attatch it to engine stand, I was wondering about removing the flywheel first, as I will be replacing rear crank seal, and probably a complete overhaul, will know more once I get inside the engine. There are 4 bolts holding flywheel on, do I remove the 4 bolts, and what kind of puller will I need. This will be my first time working on a engine of this kind. thanks,Jim
-
- 10+ Years
- Posts: 957
- Joined: Tue Dec 18, 2007 8:18 pm
- Zip Code: 55325
- Tractors Owned: 1958 ih 340 utility
1950 farmall cub
1948 ford 8n
kubota 3240
IH 154 loboy - Location: Dassel, Minnesota
Re: 154 loboy engine
it is a 154 ,painted and made to look like a 185 by PO. here is the picture of engine out.
-
- 10+ Years
- Posts: 75
- Joined: Tue Jun 26, 2007 6:08 am
Re: 154 loboy engine
Jim
Remove the 4 bolts, and you will not need a puller. Tap gengly with a hammer while pulling outward.
Good luck with the overhaul!
Hamiltonbobscubs
Remove the 4 bolts, and you will not need a puller. Tap gengly with a hammer while pulling outward.
Good luck with the overhaul!
Hamiltonbobscubs
for quality IH Cub loboy 154, 184, 185 parts visit http://www.hamiltonbobscubs.com
-
- 10+ Years
- Posts: 957
- Joined: Tue Dec 18, 2007 8:18 pm
- Zip Code: 55325
- Tractors Owned: 1958 ih 340 utility
1950 farmall cub
1948 ford 8n
kubota 3240
IH 154 loboy - Location: Dassel, Minnesota
Re: 154 loboy engine
thanks, it removed with ease.
Return to “Lo-Boy Series - 154, 184, 185”
Who is online
Users browsing this forum: No registered users and 12 guests