This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Lo-Boy 154 Hydraulic System
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 2
- Joined: Fri Aug 07, 2009 6:47 am
- Zip Code: 37742
Lo-Boy 154 Hydraulic System
I have a late model 1973 Lo-Boy 154 and I am curious as to how do you top off or check fluid lever for the hydraulic system? I am getting noise from the pump location at the motor that seems to be from low fluid. does this feed off the rear end oil and what type of fluid is used? You can email me at dlange59@gmail.com directly.
-
- Team Cub Mentor
- Posts: 5640
- Joined: Thu Aug 03, 2006 6:20 am
- Zip Code: 43358
- Tractors Owned: 48 Cub Diesel (Cubota)
53 Cockshutt 20 restored (Shooter)
52 Cockshutt 20 unrestored
47 Leader "B" (Herckie)
49 Leader "D" (Princess)
49 Leader "D" very rough
48 Leader "D" unrestored
Kubota B6200E
Kubota B6200HST
Kubota B8200HST-D - Circle of Safety: Y
- Location: OH West Mansfield
Re: Lo-Boy 154 Hydraulic System
Yes, it uses the trans./rearend as it's supply. It uses Hy Tran, or an equiv. hydraulic fluid.
-
- 10+ Years
- Posts: 2
- Joined: Fri Aug 07, 2009 6:47 am
- Zip Code: 37742
Re: Lo-Boy 154 Hydraulic System
Mr Dodson,
Thanks for the info however I am still needing to know where to fill this unit up at or at least check the level of the hydraulic system.
Thanks
Thanks for the info however I am still needing to know where to fill this unit up at or at least check the level of the hydraulic system.
Thanks
-
- 10+ Years
- Posts: 2791
- Joined: Tue Jul 22, 2008 12:44 pm
- Zip Code: 48370
- Tractors Owned: 184
- Location: Oxford, MI
Re: Lo-Boy 154 Hydraulic System
Look at the rear of the tractor. On the transmission there is a pipe plug for filling the transmission. The fluid should come to the bottom of this pipe plug while the tractor is sitting flat. (Fill trans with Hytran until it flows out of this plug)
184 w/ Creeper & 3-Point
IH 3160a Mower
IH Model 15 Tiller
IH-54 Blade
IH 3160a Mower
IH Model 15 Tiller
IH-54 Blade
-
- 10+ Years
- Posts: 7388
- Joined: Sat Jul 22, 2006 5:02 pm
- Zip Code: 00000
- Location: in northern usa
Re: Lo-Boy 154 Hydraulic System
The pipe plug is on the rear tranny veritcal cover in the center of the rear of the tractor. Each right and left final drives have pipe plugs on them too at the rear of the tractor too.
I'm technically misunderstood at times i guess its been this way my whole life so why should it change now.
Return to “Lo-Boy Series - 154, 184, 185”
Who is online
Users browsing this forum: No registered users and 16 guests