Hi all-
I have a 154 with the g-5 15 IH tiller. Problem is the guy I bought it from lost the tractor end half of the driveshaft. (that hooks to the PTO shaft).
I am looking for any help I can get.
-Does anybody perhaps have one in their scrap pile? Parts of one?
-Does anybody have a working one they can give a measurement or two from to have one fabricated?
I have the parts diagram and none of the parts are available through Case/IH.
I'm open to any ideas...
Thanks!
Clackamas Cub
1970 154 Lowboy
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
154 Tiller Driveshaft help!
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
ClackamasCub
- 10+ Years
- Posts: 14
- Joined: Mon Jul 21, 2008 5:18 pm
- Location: Molalla, Oregon
- Contact:
-
gitractorman
- 10+ Years
- Posts: 2679
- Joined: Mon Oct 24, 2005 11:35 am
- Zip Code: 14072
- eBay ID: toysforjake
- Tractors Owned: Lots of Cub Cadets!
1951 Farmall Cub
1977 IH Cub
1966 IH Cub
1965 IH Lo Boy
1964 IH Lo Boy
1949 Farmall Cub
Several IH 154 Lo Boys
1979 IH 184 Lo Boy
Simplicity 4416 Sovereign
Simplicity Conquest
Simplicity Legacy 4x4 Diesel
Mitsubishi MT180D 4x4 Diesel - Circle of Safety: Y
- Location: Grand Island, NY
Re: 154 Tiller Driveshaft help!
You're going to have a heck of a time finding one of those. The tiller was the only PTO driven attachment that was available for a lo-boy (besides a mower deck but those use pulleys instead of a pto shaft), and those alone are pretty rare. If it were me, I'd purchase one of these
http://cgi.ebay.com/FARMALL-PTO-ADAPTER ... otohosting
Then you can use a standard PTO coupler that is available almost anywhere. You'll likely have to get a piece of the correct size bar stock to make up the slide portion of the PTO shaft, but that should not be too tough to do.
Good luck,
Bill
http://cgi.ebay.com/FARMALL-PTO-ADAPTER ... otohosting
Then you can use a standard PTO coupler that is available almost anywhere. You'll likely have to get a piece of the correct size bar stock to make up the slide portion of the PTO shaft, but that should not be too tough to do.
Good luck,
Bill
Cub Cadets 682, 1811, 1864, Simplicity Legacy XL 4x4 Diesel with FEL, 60" mower, 50" Tiller
-
Keith L
- 10+ Years
- Posts: 229
- Joined: Wed Feb 07, 2007 8:24 pm
- Location: NJ, Califon
Re: 154 Tiller Driveshaft help!
I just bought some PTO parts including the part that fits the PTO shaft from Woods. I needed to repair the drive shaft for my rear mount PTO driven mower. That might be a source for you.
Keith Lukachek
55 Lo (Woods), 57 Lo(in boxes), 62 Lo(105 mower), 50 for parades, 57 FH, 58 FH, 64 Loader (Ugly Duckling), 154 (Woods), 59(Woods), 49 SAV, 58 460U Diesel
55 Lo (Woods), 57 Lo(in boxes), 62 Lo(105 mower), 50 for parades, 57 FH, 58 FH, 64 Loader (Ugly Duckling), 154 (Woods), 59(Woods), 49 SAV, 58 460U Diesel
-
ClackamasCub
- 10+ Years
- Posts: 14
- Joined: Mon Jul 21, 2008 5:18 pm
- Location: Molalla, Oregon
- Contact:
Re: 154 Tiller Driveshaft help!
Thanks for the replies. I figured this might be a bit tough. If my driveshaft guy cannot find a coupler, your adapter should make it much easier.
Return to “Lo-Boy Series - 154, 184, 185”
Who is online
Users browsing this forum: No registered users and 3 guests
