Page 1 of 1
Cub Lo-Boy 154 Carb
Posted: Wed Jul 19, 2006 9:34 pm
by Scott
Will the carb from a std cub fit a 154?
Posted: Wed Jul 19, 2006 9:43 pm
by Don McCombs
Scotty, the choke shaft is a little different.
Posted: Thu Jul 20, 2006 6:22 am
by John *.?-!.* cub owner
Thye used a Zenith carb with cable pull for choke.
Posted: Thu Jul 20, 2006 6:55 am
by Matt Kirsch
In other words, yes. You just can't use the original choke rod; you need to pick up a generic choke pull knob and cable.
Re: Cub Lo-Boy 154 Carb
Posted: Thu Jul 20, 2006 8:21 am
by George Willer
Scotty D wrote:Will the carb from a std cub fit a 154?
The IH carb is the same except for the choke shaft and its' bushings. It's possible to swap shafts, but the steel bushing the shaft goes through is solid on the engine side for the 154. Maybe that wouldn't matter?