This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
International 184
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- Posts: 25
- Joined: Sun Sep 15, 2019 11:02 am
- Zip Code: 16417
International 184
Lost my manual, so I have what may be a stupid question (or two). Is the governor spring tension adjustable on the 184? I can't get enough rpm's right now, and adjusting the governor isn't doing it. Seems as though the governor is keeping rpm's down, no matter how I adjust it, so I am assumimg spring is not putting up enough resistance. Can it be adjusted, or is it necessary to get a new spring? Or, am I looking at it wrong somehow?
-
- Team Cub Mentor
- Posts: 5654
- Joined: Thu Aug 03, 2006 6:20 am
- Zip Code: 43358
- Tractors Owned: 48 Cub Diesel (Cubota)
53 Cockshutt 20 restored (Shooter)
52 Cockshutt 20 unrestored
47 Leader "B" (Herckie)
49 Leader "D" (Princess)
49 Leader "D" very rough
48 Leader "D" unrestored
Kubota B6200E
Kubota B6200HST
Kubota B8200HST-D - Circle of Safety: Y
- Location: OH West Mansfield
Re: International 184
The things to check are: throttle cable, is it pulling the governor lever all the way, and not slipping? Go through the governor linkage set-up, according to the manual. Just look in any Cub manual, in the manuals section, the governor never changed. Have you backed off the stop screw? When you’ve done these checks and adjustments with no improvement, then replace the spring.
-
- Team Cub Mentor
- Posts: 20401
- Joined: Fri Jul 02, 2004 9:52 pm
- Zip Code: 65051
- Circle of Safety: Y
- Location: Mo. Linn
Re: International 184
Throttle cable clamps slips on my 154. About once a mowing season I have to readjust, reclamp.Gary Dotson wrote:The things to check are: throttle cable, is it pulling the governor lever all the way, and not slipping?
Two adjustments; throttle cable correctly located in the clamp and cable wire to governor wire clamp. Either adjustment off will limit throttle response.
I have an excuse. CRS.
-
- 10+ Years
- Posts: 2796
- Joined: Tue Jul 22, 2008 12:44 pm
- Zip Code: 48370
- Tractors Owned: 184
- Location: Oxford, MI
Re: International 184
Make certain that the governor to Carb rockshaft is well lubricated and adjusted properly. I had the same issue and found that the keyway at the governor rockshaft had worn and had become sloppy. I removed the rockshaft, replaced the keyway, and used some JB Weld to take up the slack upon reassembly.
184 w/ Creeper & 3-Point
IH 3160a Mower
IH Model 15 Tiller
IH-54 Blade
IH 3160a Mower
IH Model 15 Tiller
IH-54 Blade
-
- Team Cub Mentor
- Posts: 5654
- Joined: Thu Aug 03, 2006 6:20 am
- Zip Code: 43358
- Tractors Owned: 48 Cub Diesel (Cubota)
53 Cockshutt 20 restored (Shooter)
52 Cockshutt 20 unrestored
47 Leader "B" (Herckie)
49 Leader "D" (Princess)
49 Leader "D" very rough
48 Leader "D" unrestored
Kubota B6200E
Kubota B6200HST
Kubota B8200HST-D - Circle of Safety: Y
- Location: OH West Mansfield
Re: International 184
Yes, I failed to mention that. If there is slop in that woodruff key, you need to address that prior to adjusting the governor rod.
-
- Similar Topics
- Replies
- Views
- Last post
-
- 3
- 429
-
by Gary Dotson
Tue Jun 08, 2021 6:26 am
-
-
International 184 PTO belts
by treeman53 » Fri May 20, 2022 1:23 pm » in Lo-Boy Series - 154, 184, 185 - 6
- 375
-
by outdoors4evr
Thu Jun 16, 2022 6:13 am
-
-
-
international 50 snow thrower
by Ottomechanic » Sun Apr 17, 2022 6:03 pm » in Lo-Boy Series - 154, 184, 185 - 1
- 223
-
by outdoors4evr
Tue Apr 19, 2022 5:53 am
-
-
-
Looking for 12 volt 3 wire alternator wiring diagram with ballast resistor for 1971 international cub
by Kelly » Fri Nov 10, 2023 12:39 pm » in Lo-Boy Series - 154, 184, 185 - 3
- 902
-
by Gary Dotson
Sat Nov 11, 2023 8:36 am
-
Return to “Lo-Boy Series - 154, 184, 185”
Who is online
Users browsing this forum: No registered users and 1 guest