This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
184 hydraulic diversion valve
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- Posts: 48
- Joined: Fri Sep 13, 2019 3:40 pm
- Zip Code: 48623
184 hydraulic diversion valve
This is the current state of my hydraulic diversion valve. It is pretty tough to switch from front to rear with this cobbled handle. What does the original handle part look like? Do these commonly go bad or is there a good fix to get this more user friendly?
-
- 10+ Years
- Posts: 2791
- Joined: Tue Jul 22, 2008 12:44 pm
- Zip Code: 48370
- Tractors Owned: 184
- Location: Oxford, MI
Re: 184 hydraulic diversion valve
They had a round knob. (shown without the cover)
Usually the o-rings leak and need to be replaced. I notice it is very difficult to move the selector when the cylinders are fully extended.
(example: Raise mower deck all the way to the top, lower it slightly, then change the selector valve to the rear 3-point position)
Usually the o-rings leak and need to be replaced. I notice it is very difficult to move the selector when the cylinders are fully extended.
(example: Raise mower deck all the way to the top, lower it slightly, then change the selector valve to the rear 3-point position)
184 w/ Creeper & 3-Point
IH 3160a Mower
IH Model 15 Tiller
IH-54 Blade
IH 3160a Mower
IH Model 15 Tiller
IH-54 Blade
Return to “Lo-Boy Series - 154, 184, 185”
Who is online
Users browsing this forum: No registered users and 22 guests