New member here (today). Couldn't figure out how to search the posts. So I'm posting this question:
I have 2 Cub Lo Boy 184 tractors. Both of them need several grease fittings replaced. I have not been able to find size and type information for these fittings. I did see that they are push rather than screw fittings, but I'm lost re: size.
Help.
Many thanks.
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
grease fitting size?
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
- SONNY
- 10+ Years
- Posts: 4107
- Joined: Thu Nov 09, 2006 11:26 pm
- Zip Code: 61722
Re: grease fitting size?
If they are the "drive in" type, they are standard automotive size, which I think is 1/8" .
-
- Posts: 5
- Joined: Sat Apr 27, 2019 2:58 pm
- Zip Code: 21204
Re: grease fitting size?
Thanks, Sonny. There's the thread in the holes where these things go, so they must be "drive in." And I'll try the 1/8". Many thanks.
-
- Posts: 5
- Joined: Sat Apr 27, 2019 2:58 pm
- Zip Code: 21204
Re: grease fitting size?
Typo. There's *no* thread....
Return to “Lo-Boy Series - 154, 184, 185”
Who is online
Users browsing this forum: No registered users and 12 guests