This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Ipto 185
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 5+ Years
- Posts: 86
- Joined: Wed Dec 02, 2015 5:04 pm
- Zip Code: 55325
- Tractors Owned: IH Lo-boy 185, 3 point, fel. 2x Bolens QT-16, 3 point
- Location: Central Minnesota
Ipto 185
I’m back. This doesn’t look good. Ipto clutch brake support has obvious wear on it.
I will replace it with part from H-Bobs. Looking at the photo of it there the “hole in mine” has something in his. What is missing? I don’t see any wear on the clutch that this represents. Disc pack possibly rebuilt by p.o.?
I’m seeing this as wore out. What does the ipto brake support, support? What is missing and needed here?
Thanks
Al.
If you want something to change you must change something.
-
- 5+ Years
- Posts: 86
- Joined: Wed Dec 02, 2015 5:04 pm
- Zip Code: 55325
- Tractors Owned: IH Lo-boy 185, 3 point, fel. 2x Bolens QT-16, 3 point
- Location: Central Minnesota
Re: Ipto 185
This is what Bobs looks like.
If you want something to change you must change something.
-
- 10+ Years
- Posts: 1172
- Joined: Tue Oct 19, 2004 7:10 am
- Zip Code: 29130
- Tractors Owned: fcub(5)
tricycle cub
154 (4)
Earthmaster (2)
JD 40T, JD 420 crawler-loader, JD MT
JD Unstyled A, Styled A, Unstyled AR
JD H
Centaur Tractor
AC Model C, G
Cub Cadets (9)
Gibson D
Red-E - Circle of Safety: Y
- Location: SC, Ridgeway
Re: Ipto 185
Your brake support looks fine, it is just missing the brake puck which goes in that empty hole. The rear of the clutch pack, that last thick disc, moves backward slightly when disengaged and rubs on the brake puck to stop the pto from spinning. I don't think any of mine actually work and the pto stops fine when the mower is attached. My supports have the brake pucks but I never worried about adjusting them to make them work.
-
- 10+ Years
- Posts: 2784
- Joined: Tue Jul 22, 2008 12:44 pm
- Zip Code: 48370
- Tractors Owned: 184
- Location: Oxford, MI
Re: Ipto 185
The wear is due to the missing puck. Don't bother replacing the steel. Just replace the puck. They are a serviceable part.
184 w/ Creeper & 3-Point
IH 3160a Mower
IH Model 15 Tiller
IH-54 Blade
IH 3160a Mower
IH Model 15 Tiller
IH-54 Blade
-
- 5+ Years
- Posts: 86
- Joined: Wed Dec 02, 2015 5:04 pm
- Zip Code: 55325
- Tractors Owned: IH Lo-boy 185, 3 point, fel. 2x Bolens QT-16, 3 point
- Location: Central Minnesota
Re: Ipto 185
And where would I get this brake puck?
If you want something to change you must change something.
-
- Team Cub
- Posts: 11827
- Joined: Tue May 25, 2004 8:02 pm
- Zip Code: 80501
- Tractors Owned: Cubs, MH Pony, Shaw, Allis G, 1934 Silver King, JD LA and LI, Gibson D, David Bradley Tri-Trac
- Circle of Safety: Y
- Location: CO, Longmont
Re: Ipto 185
Als wrote:And where would I get this brake puck?
HamiltonBob's (sponsor at the bottom of the page) has them, or a Case/IH dealer if you have one near you.
"We don't need to think more,
we need to think differently."
-Albert Einstein
we need to think differently."
-Albert Einstein
-
- 5+ Years
- Posts: 86
- Joined: Wed Dec 02, 2015 5:04 pm
- Zip Code: 55325
- Tractors Owned: IH Lo-boy 185, 3 point, fel. 2x Bolens QT-16, 3 point
- Location: Central Minnesota
Re: Ipto 185
Ok. Thanks. I’ll check with IH tomorrow.
If the thing stops without the deal working could I just eliminate the brake support?
If the thing stops without the deal working could I just eliminate the brake support?
If you want something to change you must change something.
-
- 10+ Years
- Posts: 1172
- Joined: Tue Oct 19, 2004 7:10 am
- Zip Code: 29130
- Tractors Owned: fcub(5)
tricycle cub
154 (4)
Earthmaster (2)
JD 40T, JD 420 crawler-loader, JD MT
JD Unstyled A, Styled A, Unstyled AR
JD H
Centaur Tractor
AC Model C, G
Cub Cadets (9)
Gibson D
Red-E - Circle of Safety: Y
- Location: SC, Ridgeway
Re: Ipto 185
I have only seen the bracket sold with the puck attached. I don't think the puck is sold separate. The price for the bracket at Hamilton Bobs is reasonable,you can get a piece of brake lining and glue on to your old bracket, or just do without if your PTO stops turning when disengaged.
-
- 10+ Years
- Posts: 2784
- Joined: Tue Jul 22, 2008 12:44 pm
- Zip Code: 48370
- Tractors Owned: 184
- Location: Oxford, MI
Re: Ipto 185
You can do without it, but it takes a long time between pushing in the clutch and being able to shift without grinding the gears. Seems like you would need to be a very patient person to drive like this. Most people would get impatient and grind or jam the gears.
184 w/ Creeper & 3-Point
IH 3160a Mower
IH Model 15 Tiller
IH-54 Blade
IH 3160a Mower
IH Model 15 Tiller
IH-54 Blade
-
- 10+ Years
- Posts: 1172
- Joined: Tue Oct 19, 2004 7:10 am
- Zip Code: 29130
- Tractors Owned: fcub(5)
tricycle cub
154 (4)
Earthmaster (2)
JD 40T, JD 420 crawler-loader, JD MT
JD Unstyled A, Styled A, Unstyled AR
JD H
Centaur Tractor
AC Model C, G
Cub Cadets (9)
Gibson D
Red-E - Circle of Safety: Y
- Location: SC, Ridgeway
Re: Ipto 185
outdoors4evr wrote:You can do without it, but it takes a long time between pushing in the clutch and being able to shift without grinding the gears. Seems like you would need to be a very patient person to drive like this. Most people would get impatient and grind or jam the gears.
Als was talking about the PTO brake not the clutch brake.
-
- 10+ Years
- Posts: 2784
- Joined: Tue Jul 22, 2008 12:44 pm
- Zip Code: 48370
- Tractors Owned: 184
- Location: Oxford, MI
Re: Ipto 185
Uhoh. Sorry for steering you in the wrong direction. Thanks for the clarification Landreo.
184 w/ Creeper & 3-Point
IH 3160a Mower
IH Model 15 Tiller
IH-54 Blade
IH 3160a Mower
IH Model 15 Tiller
IH-54 Blade
Return to “Lo-Boy Series - 154, 184, 185”
Who is online
Users browsing this forum: No registered users and 9 guests