Cub Serial # Overlay & Implement Decals/NEW UPDATES 8/17/12

[tst]

Hi, I have a decal that is designed to save you time and money, it is called a serial # overlay decal. This design will save the expense and the time of replacing your old serial # tag, and retains the original tag to the tractor. This decal is designed to fit over top of your old serial # tag, it has "windows" cut in the decal so your stamped serial # shows through the decal, also on years required the RPM will show through also, the corners of the decal are made to fit around the rivets. You just clean all of the old paint and slime from your old tag and apply the decal over your old tag and you are done! These overlays are made from a high quality vinyl that has been clear coated to make it last for years to come.The vinyl is so thin you cannot tell it is not painted just like the factory. Chemicals like Carb Cleaner and Engine Degreaser can harm the decal, even it is damaged you can just peel it off and replace it. The cost for the decal is only $10.50 with the shipping in the U.S.A. Refer the chart below to find the overlay for your cub. During the long production run for these great old machines they had seven different designs of the tags, I have all seven available. Below is a sample of a Loboy tag before and after the new decal is applied so you can see the results! Just order the decal by the stock # next to the decal. Please PM me with any questions before ordering. You can send payment to
Tim Talleur
1255 Hollow Road
Clinton Corners NY 12514

I have many decals available for the Farmall and International Cub Implements so you can complete the restoration of your projects. I only reproduce these from original cub implements and try to make them as accurate as possible. All the decals are made from a high quality vinyl so they will last for many years to come. If you have a implement where the factory lettering is a painted stencil I make that stenciling in a vinyl replacement in the same color and font style as the original. There are many decals for the same implements through the long production run of the cub, when the color of the implement was changed the decal was changed, also the decals were sometimes changed on the implements with out color changes. So when you look at samples I have you might say mine does not look like that, I am always working on these in my spare time so I have more in the works or I may not have listed them yet, I appreciate all the past business from the Cub members as it helps to fund new decals, I hope to make as many cub implement decals as possible available for these great old machines. I do go to a few cubfests and hope to meet more of you so I can put faces to the names on the forum.
I have listed below what is now available, I have links that you can click on to see the decal samples, I could not post all the pictures in the listing because of space limitations. If you have questions or see decals you would like to purchace or just PM me with the stock #s and I will quote a price. I will be posting pictures in the future of original implements so you can see how the location of how those decals were applied.

Thanks Tim

Cub 22 and Loboy L22 Sickle Bar Mower
#131 & #132 , these are located on the side of the wrap around belt guard, two font styles available as were the originals
#133 is located on the saddle for the L22 Loboy Sickle Bar Mower
#134 was located on the head of the sickle bar if you had the 2 bar steel rod grassbar
#135 was located on the saddle for the Cub 22 Sickle Bar Mower
click on the link to see the samples http://i1061.photobucket.com/albums/t47 ... Decals.jpg
also # 152 was used on the late style and replacement belt guards, this style belt guard was the flat metal and just bent over top of the PTO pulley, it bolted on top of the rear axle housing, click here to see the sample http://i1061.photobucket.com/albums/t47 ... Decals.jpg

Red Painted 54A Snow Plow & Grader Blade
#141 is applied to the left side of the plow frame
#142 is applied to the right side of the plow frame towards the back
#142 is applied to the right side of the plow frame towards the front
click on the link to see the sample http://i1061.photobucket.com/albums/t47 ... decals.jpg

#1 Fast Hitch Platform Carrier
# 146 & #147 was applied to the top round rail, :note: I have seen two styles for #147, the style I have is cut out around the letters and the red paint from the carry all itself is the back ground, this was taken from a NOS Carrier still strapped to the shipping crate
Click on the link to see the sample http://i1061.photobucket.com/albums/t47 ... rDecal.jpg

International C 2 & C 3 Mower Decks
#151 or #153 was applied to the belt guard, your choice
#152 was applied on the front middle edge of the mower deck
#153 and #154 were applied to the left and right edge of the decks so 2 are required of each
click on the link to see the sample http://i1061.photobucket.com/albums/t47 ... Decals.jpg

White Painted 100 Fast Hitch Back Blade
#161 was applied to the back left side of the back blade
#162 was applied centered underneath #161
click on the link to see the samples http://i1061.photobucket.com/albums/t47 ... edecal.jpg

Cub Loboy Yellow Painted Snow Plow or Leveling & Grader Blade
#165 was applied on the back side of the blade in the center
#166 was applied on the left side frame rail in the center
click on this link to see the sample http://i1061.photobucket.com/albums/t47 ... rblade.jpg

193 Moldboard Plow
#166 and #167 are applied to the top of Beam
click on this link to see sample http://i1061.photobucket.com/albums/t47 ... calset.jpg

Yellow painted 54A Snow Plow
#171 applied to back center of the blade
#172 applied to the left side frame rail centered
click on the link to see the sample http://i1061.photobucket.com/albums/t47 ... wBlade.jpg

184 Fast Hitch Planter
#175 applied on left side frame bracket near wheel
101A Fertilizer
#176 was applied to countershaft bracket
http://s1061.photobucket.com/albums/t47 ... 01a184.jpg

Cub - 3 Field Cultivator
#181 and # 182 both are applied to the right side support beam
http://s1061.photobucket.com/albums/t47 ... decals.jpg

Cub 189 Two Way Plow
#241 is applied to the left plow beam facing out
#242 is applied to the right plow beam facing out
*letters are yellow , not orange, they change color when I scan them in
http://s1061.photobucket.com/albums/t47 ... 89plow.jpg

Red Painted 194 Fast Hitch Plows,Version 1, several versions have been made for the red plow, I have few different types available
#231 applied to the right side of the plow beam
#233 applied on the left side beam near the point
#227 shown in Version 2 is applied in between # 233 and # 234
#234 applied to the left side beam behind #233
http://s1061.photobucket.com/albums/t47 ... 4redV1.jpg

Red 194 Plow, Version 2
#226 applied to right side of plow beam
#227 is applied to left side of plow beam
http://s1061.photobucket.com/albums/t47 ... 4redV2.jpg

Blue Painted 144 Cultivators
#201 is applied on top of the front right side tool bar
*letters are yellow , not orange, they change color when I scan them in
http://s1061.photobucket.com/albums/t47 ... lue144.jpg

Red Painted LF-38 Lo-Boy Fast Hitch Disc Harrow
# 185 is applied on the back of the weight box of the left disc
# 187 is applied on the back of the weight box of the right disc
http://s1061.photobucket.com/albums/t47 ... redL38.jpg

White Painted L-38 Disc for Cub Fast Hitch
#191 applied to back far left side of the weight box on the left disc
#192 applied to the back far right side of the weight box on the left disc
#193 applied to the back far left side of the weight box on the right disc
#194 is applied to back far right side of the weight box on the right disc
http://s1061.photobucket.com/albums/t47 ... iteL38.jpg

White 194 Fast hitch plow
#221 is applied to the left side of the plow beam
http://s1061.photobucket.com/albums/t47 ... ite194.jpg

Attachments

loboy tag.jpg (29.28 KiB) Viewed 1949 times

Last edited by tst on Sat Aug 18, 2012 9:53 pm, edited 12 times in total.

[Glen]

Hi,
This looks like some good work! Wanted to say, my friend had a 1955 Farmall Cub that had the serial number plate that looked like 103, that you have 1954 on. It was not number 105, so I don't know, maybe they changed during the year or something. Thought you might like to know. Glen.

[tst]

Thanks Glen, spent many hours researching these and checking many cubs, they do start to look alike after a while, I am sure they are right
Tim

[scotlem]

Hi,
This looks like some good work! Wanted to say, my friend had a 1955 Farmall Cub that had the serial number plate that looked like 103, that you have 1954 on. It was not number 105, so I don't know, maybe they changed during the year or something. Thought you might like to know. Glen.

Same here Tim. Dads is an original 1955 and has a serial number plate identical to number 103. Send you a picture if you would like.

[04mustang]

WOW, lots great stuff here!

[BullDAWG]

Hi,
This looks like some good work! Wanted to say, my friend had a 1955 Farmall Cub that had the serial number plate that looked like 103, that you have 1954 on. It was not number 105, so I don't know, maybe they changed during the year or something. Thought you might like to know. Glen.

Same here Tim. Dads is an original 1955 and has a serial number plate identical to number 103. Send you a picture if you would like.

just a guess but its probably an early 1955 and was a parts run-over, allot of places when changing from 1 year model to another will have a mixture of the 2 year models, my sons car was a late 2003 and needed an oil fill cap but after looking at the part they said was it I knew it wasn't right. I told em to look up a '04 and it fit perfect... So they instaslled an 04 run engine in a '03 car and I've seen tons of the opposite too (where a newer model had taillights or other parts that were left over from the previous year and used on the newer model) so a serial tag on the bolster is probably going to be the same especially in the early days where they made more cubs in 1 year than the whole run of long stripes in the 70's (actually there are more "White" demo 1950-1950 1/2 than all the long stripe years combined...

[tst]

Many New Updates on 8/17/2012, lots of new decals added
thanks Tim

[baldwindiesel]

Tim:
I would be interested in some decals for my just restored implements. Can you email me ? Also: what about the Fast Hitch Spring Tooth Harrow, I will eventually need those too.

Thanks !
baldwindiesel

[tst]

Hi Baldwindiesel, I sent you a personal message
Tim